ABB 07EA90-SI GJR5251200R0101 模拟输入模块

ABB 07EA90-SI GJR5251200R0101 全新模拟输入模块

ABB 07EA90-SI GJR5251200R0101：这个系统常数的改变变得有效：与下一个热启动或下一个冷启动。注意：在二进制区域中的默认设置为：-传输4字节和接收4字节。这是通过默认组合KW00、10=KW00、11=0获得的。配置的组合KW00、10=KW00、11=4与默认组合效果相同。

ABB 07EA90-SI GJR5251200R01011：组合KW00、10=KW00、11=100是不可允许的！它将意味着：传输0个单词，接收0个单词。当在单词区域中使用时，未使用的地址的较高的8个通道可由模拟模块使用（而不是由KR/KT)使用。

ABB 07EA90-SI GJR5251200R0101: This system constant change becomes effective: with the next hot start or the next cold start. Note: The default Settings in the binary area are: - Transmit 4 bytes and receive 4 bytes. This is obtained by default combinations KW00, 10=KW00, and 11=0. The configured combination KW00, 10=KW00, 11=4 has the same effect as the default combination.

ABB 07EA90-SI GJR5251200R01011: Combination KW00, 10=KW00, 11=100 is not allowed! It will mean: Transmit 0 words, receive 0 words. When used in the word area, the higher 8 channels of the unused address can be used by the analog module (rather than by KR/KT).