摩托罗拉MVME162-213嵌入式控制器

摩托罗拉MVME162-213嵌入式控制器

在检测到主要问题时，继电器执行以下操作：

•断开严重故障继电器的电源

•禁止所有输出继电器的操作并冻结当前状态

•阻止保护和控制元件

•将“IN SERVICE”LED变为红色

•闪烁“ALARM”LED•显示“Major Self-test error”（主要自检错误），并将错误代码作为目标消息

•在事件记录器中记录主要自检故障在这两种情况下，如果错误仍然处于活动状态，则无法清除目标。

每隔1秒通信序列号无效通信卡没有与订单代码匹配的有效数据。每1秒一次面板序列号无效控制面板没有与订单代码匹配的有效数据。每1秒PSU S/N无效电源设备单元没有与订单代码匹配的有效数据。

When a major problem is detected, the relay performs the following actions:

• Disconnect the power supply to the critically malfunctioning relay

• Disable all output relays and freeze the current state

• Block protection and control elements

• Turn the "IN SERVICE" LED to red

• Flashes the "ALARM" LED• Displays "Major Self-test error" (major self-test error) with the error code as the target message

• Record major self-test failures in the event logger In both cases, the target cannot be cleared if the error is still active.

Every 1 second communication serial number invalid Communication card has no valid data matching the order code. Every 1 second Panel Serial number Invalid The Control panel has no valid data matching the order code. Every 1 second PSU S/N invalid power unit has no valid data matching the order code.