SDCS-FEX-2A振动模块体积小能承受强烈振动工作条件

SDCS-FEX-2A振动模块体积小能承受强烈振动工作条件

产品说明

该驱动器的主要技术参数如下：

额定电压：380V
额定电流：2A
大输出功率：1.5KW
控制方式：矢量控制
该驱动器还具有多种保护机制，包括过流保护、过压保护、欠压保护等，以确保设备的安全性和稳定性。

安装与调试
在安装和调试驱动器时，请务必遵循以下步骤：

确保电源已正确接线，并检查接地是否良好。
将驱动器与电机连接，并检查连接是否牢固。
进行驱动器参数的设置和校准，并进行必要的调试。

Product description

The main technical parameters of the drive are as follows:

Rated voltage: 380V
Rated current: 2A
Maximum output power: 1.5KW
Control mode: vector control
The drive also has a variety of protection mechanisms, including overcurrent protection, overvoltage protection, undervoltage protection, etc., to ensure the safety and stability of the device.

Installation and commissioning
When installing and debugging the drive, be sure to follow these steps:

Ensure that the power supply is properly connected and that the grounding is correct.
Connect the driver to the motor and check that the connection is secure.
Set and calibrate driver parameters and perform necessary debugging.