GE DS3800NGMA 印刷电路板 有四个旋转电位器 阜阳

GE DS3800NGMA 印刷电路板 有四个旋转电位器 阜阳

产品描述

DS3800NGMA是GE的印刷电路板，设计为其Mark IV / Speedtronic系列的一部分。Mark IV专为燃气/蒸汽轮机控制而设计，可以自动化包括停机和冷却在内的程序，以实现更一致的管理。它还可以帮助保持涡轮机系统在安全参数范围内运行。

DS3800NGMA用作通用乘法卡。它具有以下规格：

它的所有角落都是工厂钻孔的。

它的提取器夹安装在两个右上角。提取夹通过为技术人员提供手柄来帮助插入和提取 PCB，从而节省精细电路。提取器也可用于利用PCB。

它安装了四个尼龙夹，以支持可选的辅助板DS3800DGPA。安装了 <> 个金属销，用于在安装辅助装置时将其固定到位。

它有一个琥珀色 LED;这被标记为“Imok”。

它有13个测试点。

它有一个晶体管。

它有一个 28 针 Augat 连接器（母头）。

它有四个旋转电位器。

它有四个跳线开关。

它有一个PCB加固杆。它沿着电路板的顶部边缘放置。

它有对齐标记，并标记为“6BA03”和“NGMA 6DA02”。

它有五个集成电路

它有一个连接器（位于左边缘）与其他 PCB 通信.这是一个 218A4553-1 A/mp 102041-1 连接器。

GE DS3800NGMA 印刷电路板 有四个旋转电位器 阜阳

Product description

The DS3800NGMA is a GE printed circuit board designed as part of its Mark IV/Speedtronic family. Designed for gas/steam turbine control, the Mark IV automates procedures including downtime and cooling for more consistent management. It can also help keep turbine systems operating within safe parameters.

The DS3800NGMA is used as a universal multiplication card. It has the following specifications:

All corners of it are factory drilled.

Its extractor clips are mounted in the two upper right corners. Extraction clips save fine circuitry by providing technicians with handles to help insert and extract PCBS. Extractors can also be used to utilize PCBS.

It is fitted with four nylon clips to support the optional auxiliary board DS3800DGPA. A <> metal pin is installed to hold it in place when the auxiliary device is installed.

It has an amber LED; This is labeled "Imok".

It has 13 test sites.

It has a transistor.

It has a 28-pin Augat connector (female head).

It has four rotating potentiometers.

It has four jumper switches.

It has a PCB reinforcement bar. It is placed along the top edge of the board.

It has alignment marks and is labeled "6BA03" and "NGMA 6DA02".

It has five integrated circuits

It has a connector (located on the left edge) to communicate with other PCBS. This is A 218A4553-1 A/mp 102041-1 connector.