欢迎光临厦门雄霸电子商务有限公司官网!
工控|工业|自动化进口DCS系统 机器人系统 大型伺服系统
全国咨询热线(Zona)18150899970
联系我们
厦门雄霸电子商务有限公司
手机:18150899970
QQ:391038081
邮箱:sales@saulcontrol.com
地址 :福建省厦门市思明区吕岭路1733号2008单元(万科创想中心)
联系人:Zona
您的位置: 首页>>产品展示 >
产品展示 》 GE 》 吕梁 GE DS3800NFCD1K1E 变频驱动器 基本控制面板

吕梁 GE DS3800NFCD1K1E 变频驱动器 基本控制面板

型号:DS3800NFCD1K1E

吕梁 GE DS3800NFCD1K1E 变频驱动器 基本控制面板

品牌 GE 加工定制 否 10/100BaseT(X)端口 5/8/24/4/4 100Base-FX 端口 2 光纤模式 MM - 多模 SS- 单模 以太网标准 IEEE 802.3: 10Base-T MAC Table 1024/2048 处理方式 储存和转发 输入电源冗余 是 功率消耗(典型值) 3 瓦-9.6 瓦 电流过载保护 是 反极性保护 是 可售卖地 全国

吕梁 GE DS3800NFCD1K1E 变频驱动器 基本控制面板

产品描述

GE烧制电路板DS3800NFCD1K1E在每个角落都有1个孔,用于用螺钉将电路板连接到驱动器内部。该板装有 4 个支架,用于连接子卡。子卡提供额外的处理、连接器和功能。该板装有多个晶体管-晶体管逻辑器件。GE点火电路板DS3800NFCD1K1E还装有13个红色指示灯LED和1个琥珀色指示灯LED。该板还具有 1 个用于电可擦除可编程只读存储器 (EEPROM) 模块的插座。该板还装有多个跳线和 2 个 34 针连接器。

GE烧制电路板DS3800NFCD1K1E装有3个28针母连接器。连接器设计用于连接到安装在主板上方的女儿卡。子卡的背面有一个匹配的连接器。将子卡按到主板上时,将连接 28 针连接器。

28 针连接器承载为卡供电的电压。连接器还携带卡接收的控制信号进行处理。其他控制信号从卡发送到电路板。1 个子卡还装有 10 针带状电缆。带状电缆的一端永 久连接到卡上,另一端端接在 10 针连接器中。将带状电缆上的连接器插入GE燃烧电路板DS3800NFCD1K1E上的连接器。仅当主板断开电源并从驱动器上卸下时,才断开或连接 10 针带状电缆。

吕梁 GE DS3800NFCD1K1E 变频驱动器 基本控制面板

Product description

The GE fired circuit board DS3800NFCD1K1E has 1 hole in each corner for attaching the board to the inside of the driver with screws. The board is equipped with four brackets for connecting subcards. Subcards provide additional processing, connectors, and functionality. The board is equipped with a plurality of transistor-transistor logic devices. The GE ignition circuit board DS3800NFCD1K1E also has 13 red indicator leds and 1 amber indicator LED. The board also has a socket for an electrically erasable programmable read-only memory (EEPROM) module. The board is also equipped with multiple jumpers and two 34-pin connectors.

The GE fired circuit board DS3800NFCD1K1E is equipped with three 28-pin female connectors. The connector is designed to connect to the daughter card mounted above the motherboard. The back of the sub-card has a matching connector. When the subcard is pressed to the motherboard, the 28-pin connector is connected.

The 28-pin connector carries the voltage that powers the card. The connector also carries the control signal received by the card for processing. Other control signals are sent from the card to the circuit board. The 1 sub-card is also equipped with a 10-pin ribbon cable. One end of the ribbon cable is permanently attached to the card and the other end is terminated in a 10-pin connector. Plug the connector on the ribbon cable into the connector on the GE combustion circuit board DS3800NFCD1K1E. Disconnect or connect the 10-pin ribbon cable only when the motherboard is disconnected from the power supply and removed from the drive.

吕梁 GE DS3800NFCD1K1E 变频驱动器 基本控制面板

吕梁 GE DS3800NFCD1K1E 变频驱动器 基本控制面板
主要产品

PLC:Allen Bradley ControlLogix,ABB DCS 800xA 模块,

GE FANUC、施耐德电气Modicon Quantum、和利时

DCS:霍尼韦尔TDC3000 CC-PDOB01,西门子MOORE,

Foxboro、Ovation、YOKOGAWA CP451-10、Emerson Epro

ESD:Invensys Triconex、HIMA DCS、本特利内华达 3500

监控系统 3500/42,ICS Triplex,伍德沃德 9907-164



相关型号

GE DS3800HMPJ1B1D    GE Fanuc    控制器    GE DS3800HSCA1C1A
GE DS3800HMPJ1AD    GE Fanuc    控制器    GE DS3800HSCA1B1A
GE DS3800HMPJ1A1D    GE Fanuc    控制器    GE DS3800HSCA
GE DS3800HMPJ1A1A    GE Fanuc    控制器    GE DS3800HSAB1D1B

GE DS3800HMPG1G1D    GE Fanuc    控制器    GE DS3800HSAA1U1M
GE DS3800HMPG1F1D    GE Fanuc    控制器    GE DS3800HSAA1T1M
GE DS3800HMPG1E1D    GE Fanuc    控制器    GE DS3800HSAA1T1L
GE DS3800HMPG1C1C    GE Fanuc    控制器    GE DS3800HS0D1J1G

GE DS3800HMPF1E1F    GE Fanuc    控制器    GE DS3800HRTA1A1B
GE DS3800HMPF1E1E    GE Fanuc    控制器    GE DS3800HRTA1A1A
GE DS3800HMPF1E1D    GE Fanuc    控制器    GE DS3800HRRB1D1D
GE DS3800HMPF1C1B    GE Fanuc    控制器    GE DS3800HRRB1C1B


我们专注于控制系统和驱动器。我们还分销许多新的硬件和软件产品,以帮助支持您现有的控制系统或利用新的控制技术。我们拥有广泛的测试设施,我们可以为所有剩余部件提供 1 年保修。√ 优价格√ 高品质√ 专业服务√ 快速交货√ 大量库存Ø如果您发现任何其他供应商的相同零件比我们便宜,我们将尝试匹配相同的价格,或为您提供进一步的折扣。Ø如果您还有任何疑问,请随时与我们联系,我们有足够的耐心和热情为您解释一切。Ø如果您询价多于一件/物品,请告知我们,因为我们可以为您安排折扣。Ø 期待您的咨询

在线客服
联系方式

热线电话

18150899970

邮箱

sales@saulcontrol.com

上班时间

周一到周五

微信
WhatsApp
线