欢迎光临厦门雄霸电子商务有限公司官网!
工控|工业|自动化进口DCS系统 机器人系统 大型伺服系统
全国咨询热线(Zona)18150899970
联系我们
厦门雄霸电子商务有限公司
手机:18150899970
QQ:391038081
邮箱:sales@saulcontrol.com
地址 :福建省厦门市思明区吕岭路1733号2008单元(万科创想中心)
联系人:Zona
您的位置: 首页>>产品展示 >
产品展示 》 GE 》 周口 GE DS3800NFC1J1G 电力励磁板

周口 GE DS3800NFC1J1G 电力励磁板

型号:DS3800NFC1J1G

周口 GE DS3800NFC1J1G 电力励磁板

品牌 GE 加工定制 否 操作温度 (-22°F to +150°F). 湿度 95%, noncondensing. 硬件 RS422接口 指示灯驱动 显示通道(s) 上面的LED处于警戒状态。 储存温度 (-40°F to +185°F). 重量 0.82 kg 通道更新率 1 second, typical 能量功耗 4.6 watts max. 功耗 10.5瓦 通信 USB-B 面板 USB-B接口 协议 支持的BN主机协议 电缆长度 USB数据线长度:5米 存储温度 -40°C至+85°C TDI模块 1前高槽位 io模块 1个全高后槽位 可售卖地 全国

周口 GE DS3800NFC1J1G 电力励磁板

GE点火电路板DS38OONFOA1C1D的每个角上有一个孔,用于用螺钉将电路板固定到竞频器内部。该板有4个支座,用于连接子卡。子卡提供了额外的处理、连接器和功能。电路板上装有多个晶体管-晶体管逻辑器件。GE点火电路板DS380ONFOA1C1D也装有13个红色指示灯LED和1个球珀色指示灯LED。该板还有一个用于电可擦除可编程只读存储器(EEPROM)模块的插座。该板还配有多个跳线和2个34引脚连接器。

34针连接器位于电路板的一边,这样带状电缆就不会干扰电路板上的元件。也就是说,带状电缆可以远离电路板并沿着驱动器的侧面布线,而不是穿过电路板的表面。34针连接器有固定门锁,防止带状电缆意外断开。但是,固定门锁需要一些特殊考虑。

在将带状电缆连接到连接器之前,必须一次打开一个固定门锁。然后,您可以将带状电缆连接到板上的连接器。要固定带状电缆,请在带状电缆上旋转固定门锁,直到它们卡入到位。从连接器上卸下带状电缆时,首先旋转打开固定门锁。然后,握住带状电缆的塑料连接器,轻轻将其从板上的连接器中拉出。

周口 GE DS3800NFC1J1G 电力励磁板
The GE ignition circuit board DS38OONFOA1C1D has a hole in each corner for fastening the circuit board to the inside of the competitor with screws. The board has four supports for connecting subcards. The daughter card provides additional processing, connectors, and functionality. Multiple transistor-transistor logic devices are installed on the circuit board. GE ignition circuit board DS380ONFOA1C1D is also equipped with 13 red indicator LED and 1 ball color indicator LED. The board also has a socket for an electrically erasable programmable read-only memory (EEPROM) module. The board also comes with multiple jumpers and 2 34-pin connectors.

The 34-pin connector is located on one side of the board so that the ribbon cable does not interfere with the components on the board. That is, the ribbon cable can be run away from the board and along the side of the driver, rather than across the surface of the board. The 34-pin connector has a fixed door lock to prevent accidental disconnection of the ribbon cable. However, fixed door locks require some special considerations.

A fixed door lock must be opened one at a time before the ribbon cable is connected to the connector. You can then connect the ribbon cable to the connector on the board. To secure the ribbon cable, rotate the lock on the ribbon cable until they snap into place. When removing the ribbon cable from the connector, first rotate to open the fixed door lock. Then, hold the plastic connector of the ribbon cable and gently pull it out of the connector on the board.

周口 GE DS3800NFC1J1G 电力励磁板

周口 GE DS3800NFC1J1G 电力励磁板
主要产品

PLC:Allen Bradley ControlLogix,ABB DCS 800xA 模块,

GE FANUC、施耐德电气Modicon Quantum、和利时

DCS:霍尼韦尔TDC3000 CC-PDOB01,西门子MOORE,

Foxboro、Ovation、YOKOGAWA CP451-10、Emerson Epro

ESD:Invensys Triconex、HIMA DCS、本特利内华达 3500

监控系统 3500/42,ICS Triplex,伍德沃德 9907-164



相关型号

GE DS3800HMPJ1B1D    GE Fanuc    控制器    GE DS3800HSCA1C1A
GE DS3800HMPJ1AD    GE Fanuc    控制器    GE DS3800HSCA1B1A
GE DS3800HMPJ1A1D    GE Fanuc    控制器    GE DS3800HSCA
GE DS3800HMPJ1A1A    GE Fanuc    控制器    GE DS3800HSAB1D1B

GE DS3800HMPG1G1D    GE Fanuc    控制器    GE DS3800HSAA1U1M
GE DS3800HMPG1F1D    GE Fanuc    控制器    GE DS3800HSAA1T1M
GE DS3800HMPG1E1D    GE Fanuc    控制器    GE DS3800HSAA1T1L
GE DS3800HMPG1C1C    GE Fanuc    控制器    GE DS3800HS0D1J1G

GE DS3800HMPF1E1F    GE Fanuc    控制器    GE DS3800HRTA1A1B
GE DS3800HMPF1E1E    GE Fanuc    控制器    GE DS3800HRTA1A1A
GE DS3800HMPF1E1D    GE Fanuc    控制器    GE DS3800HRRB1D1D
GE DS3800HMPF1C1B    GE Fanuc    控制器    GE DS3800HRRB1C1B


我们专注于控制系统和驱动器。我们还分销许多新的硬件和软件产品,以帮助支持您现有的控制系统或利用新的控制技术。我们拥有广泛的测试设施,我们可以为所有剩余部件提供 1 年保修。√ 优价格√ 高品质√ 专业服务√ 快速交货√ 大量库存Ø如果您发现任何其他供应商的相同零件比我们便宜,我们将尝试匹配相同的价格,或为您提供进一步的折扣。Ø如果您还有任何疑问,请随时与我们联系,我们有足够的耐心和热情为您解释一切。Ø如果您询价多于一件/物品,请告知我们,因为我们可以为您安排折扣。Ø 期待您的咨询

在线客服
联系方式

热线电话

18150899970

邮箱

sales@saulcontrol.com

上班时间

周一到周五

微信
WhatsApp
线