IC697MDL350 CPU模块控制器 GE 高浪涌能力

IC697MDL350 CPU模块控制器 GE 高浪涌能力

IC697MDL350离散输出模块由GE Intelligent Platforms/GE Fanuc制造，属于90-70系列。该模块的额定电压为120伏交流电，32个输出
点中的每一个输出点的电流为0.5安培，这些输出点被隔离成4组，每组有8个点。

IC697MDL350模块是GE Fanuc制造的离散输出模块，属于系列90-70。它的工作电压为120伏交流电，32个输出点中的每一个都具有0.5
安培的电流容量，这些输出点被隔离成4组，每组B个点。该模块具有约20倍额定电流的高浪涌容量。它允许在不同的交流电源相位上使用每一个8点组。每个输出组都装有一个额定电流为5安培的保险丝，它会显示浪涌电流，使输出适用于各种电感负载。C697MDL350输出模块具有LED指示灯，可指示电路PLC侧每个输出点的开/关状态。它还具有一个LED，可显示位于模块顶部的保险丝的状态。

GE Fanuc IC697MDL350输出模块采用机械键控，通过使用相同类型的模块进行更换来增强更换过程。该模块的用户无需跳线或DIP开关
即可执行/0参考的配置功能。配置是通过MS-DOS或Windows编程软件完成的，这些软件通过SNP端口或以太网TCP/IP端口在Windows 95或Windows NT操作系统上运行。此配置功能预装在用于编程的设备上。IC697MDL350输出模块与许多负载设备匹配，例如指示灯、螺线管和电机启动器。0.5安培额定电流适用于每个点的长期电流值。由于模块具有散热功能，

IC697MDL350 CPU模块控制器 GE 高浪涌能力

The IC697MDL350 discrete output module is manufactured by GE Intelligent Platforms/GE Fanuc and belongs to the 90-70 series. The module has a rated voltage of 120 volts AC with 32 outputs
Each output point in the points has a current of 0.5 amps, and these output points are isolated into 4 groups of 8 points each.

The IC697MDL350 module is a discrete output module manufactured by GE Fanuc and belongs to the series 90-70. It operates at 120 volts AC and has 0.5 for each of the 32 output points
The current capacity of the ampere, these output points are isolated into 4 groups, each group B points. The module has a high surge capacity of about 20 times the rated current. It allows each 8-point group to be used on different AC power supply phases. Each output set is fitted with a fuse rated at 5 amps, which displays the inrush current, making the output suitable for a variety of inductive loads. The C697MDL350 output module has an LED indicator that indicates the on/off status of each output point on the PLC side of the circuit. It also has an LED that shows the status of the fuse located at the top of the module.

The GE Fanuc IC697MDL350 output module is mechanically keyed to enhance the replacement process by using the same type of module for replacement. Users of this module do not need a jumper or DIP switch
You can perform the configuration function referenced by /0. Configuration is done via MS-DOS or Windows programming software that runs on Windows 95 or Windows NT operating systems via SNP ports or Ethernet TCP/IP ports. This configuration feature comes pre-installed on the device used for programming. The IC697MDL350 output module is compatible with many load devices, such as indicator lights, solenids and motor starters. The 0.5 amp current rating applies to the long-term current value at each point. Since the module has a cooling function,

IC697MDL350 CPU模块控制器 GE 高浪涌能力
型号推荐

PM861AK01 3BSE018157R1    ABB DCS    XV C722 AE016    AI930S    风电模块
PM825/3BSE010796R1    ABB DCS    XV C722 AE015    AI895 3BSC690086R1    PLC控制器
PM802F/3BDH000002R1    ABB DCS    XV C723 AE07    AI845(3BSE023675R1)    火焰检测器
PM802F 3BDH000002R1 PM861A    ABB DCS     XV C767 AE102    AI845 AI810    DP通讯卡
PM632 3BSE005831R1    ABB DCS    XV C772 A102    AI830A 3BSE040662R1    光纤板 通讯板
PM511V08 3BSE011180R1    ABB DCS    XV C723 AE06    AI830 3BSE008518R1    主控制板
PM511V08    ABB DCS    XV C768 AE105    AI815(3BSE052604R1)    驱动电路板
PM510V16 3BSE008358R1    ABB DCS    XV C768 AE101    AI810 3BSE008516R1    主控制器
PM510V16    ABB DCS    XV C768 AE106    AI801    电子元器件
PHARPSFAN03000    ABB DCS    XV C768 AE102    AI086-8/4    调速器主板
PHARPS32200000    ABB DCS    XV C769 AE101    AGPS-21C    压力控制器
PFVK 104 YM110001-SD    ABB DCS    XV C724 A03    PM864AK01/PM861AK02    控制器模件