IC697MDL241 CPU模块处理器 GE通用 冗余模块

IC697MDL241 CPU模块处理器 GE通用 冗余模块

GE Fanuc IC697MDL241离散输入模块是作为90-70系列产品线的一部分制造的。该模块的工作电压为240伏交流电，并带有16个隔离输
入点。它还具有20毫秒的输入滤波时间，并且与接近开关兼容。

IC697MDL241输入模块是GE Fanuc制造的离散输入模块，属于系列90-70。它在240伏交流额定电压下运行，具有16个立的隔离点，输入
滤波时间为20毫秒，并且与接近开关兼容。该模块专为与可编程逻辑控制器(PLC)一起使用而设计，每个隔离输入均可用作单个交流电源相位。它还具有与IEC标准电流-电压特性反应的输入，这些特性与不同的接近开关兼容。GE Fanuc lC697MDL241模块具有LED，用于指示电路逻辑侧每个点的开和关状态。LED位于模块顶部.

GE Fanuc IC697MDL241离散输入模块采用机械键控，可在现场轻松更换为相应的模块类型。用户可以配置I/O参考，不需要DIP跳线或开
关。这些配置可以通过运行在Windows NT或Windows 95操作系统上的Windows或MS-DOS编程软件的配置功能通过SNP端口或以太网TCP/IP端口完成。预装编程软件配置功能。IC697MDL241模块与一系列输入设备相匹配，例如限位开关、选择器开关、按钮以及2线和3线电子接近开关。IC697MDL241模块具有电容输入电路，可确保低热耗散，这有助于提高模块的可靠性和命。它在导通状态下的典型输入电流为10毫安，在关断状态下还可以吸收高达5毫安的漏电流。

IC697MDL241 CPU模块处理器 GE通用 冗余模块

The GE Fanuc IC697MDL241 discrete input modules are manufactured as part of the 90-70 series product line. The module operates at 240 volts AC and has 16 isolated inputs
Entry point. It also has an input filtering time of 20 milliseconds and is compatible with proximity switches.

The IC697MDL241 input module is a discrete input module manufactured by GE Fanuc and belongs to the series 90-70. It operates at a 240 volt AC rating with 16 vertical isolation points and inputs
The filtering time is 20 ms and is compatible with proximity switches. The module is designed for use with programmable logic controllers (PLCS) where each isolated input can be used as a single AC power phase. It also has inputs that respond to IEC standard current-voltage characteristics that are compatible with different proximity switches. The GE Fanuc lC697MDL241 module has an LED that indicates the on and off status of each point on the logic side of the circuit. The LED is located on top of the module.

The GE Fanuc IC697MDL241 discrete input module is mechanically keyed and can be easily replaced with the appropriate module type in the field. Users can configure the I/O reference without the need for DIP jumpers or on
close These configurations can be done via the configuration functions of Windows or MS-DOS programming software running on Windows NT or Windows 95 operating systems via SNP ports or Ethernet TCP/IP ports. Pre-installed programming software configuration function. The IC697MDL241 module is matched to a range of input devices, such as limit switches, selector switches, buttons, and 2 - and 3-wire electronic proximity switches. The IC697MDL241 module has a capacitive input circuit to ensure low heat dissipation, which helps to improve the reliability and life of the module. It has a typical input current of 10 milliamps in the on-state and can also absorb up to 5 milliamps in the off state.

IC697MDL241 CPU模块处理器 GE通用 冗余模块
型号推荐

PM861AK01 3BSE018157R1    ABB DCS    XV C722 AE016    AI930S    风电模块
PM825/3BSE010796R1    ABB DCS    XV C722 AE015    AI895 3BSC690086R1    PLC控制器
PM802F/3BDH000002R1    ABB DCS    XV C723 AE07    AI845(3BSE023675R1)    火焰检测器
PM802F 3BDH000002R1 PM861A    ABB DCS     XV C767 AE102    AI845 AI810    DP通讯卡
PM632 3BSE005831R1    ABB DCS    XV C772 A102    AI830A 3BSE040662R1    光纤板 通讯板
PM511V08 3BSE011180R1    ABB DCS    XV C723 AE06    AI830 3BSE008518R1    主控制板
PM511V08    ABB DCS    XV C768 AE105    AI815(3BSE052604R1)    驱动电路板
PM510V16 3BSE008358R1    ABB DCS    XV C768 AE101    AI810 3BSE008516R1    主控制器
PM510V16    ABB DCS    XV C768 AE106    AI801    电子元器件
PHARPSFAN03000    ABB DCS    XV C768 AE102    AI086-8/4    调速器主板
PHARPS32200000    ABB DCS    XV C769 AE101    AGPS-21C    压力控制器
PFVK 104 YM110001-SD    ABB DCS    XV C724 A03    PM864AK01/PM861AK02    控制器模件