IC697ALG230 GE 8个输入AI模拟量输入模块

IC697ALG230 GE 8个输入AI模拟量输入模块

通讯口介绍：

1.以太网口（RJ45）说明：

CPE305该型号CPU以太网口，有异于GE PLC其它型号以太网设备。

在ME编程软件中不支持设置临时IP.产品出厂时缺省值默认一个IP地址为：

192.168.0.100 且只支持首 次通讯使用，当硬件配置修改后该地址失效。

2.串口（RJ-25\RJ-232）说明：

CPE305型号CPU带一个串口，该通讯口可用来和编程软件通讯。上装下

载程序。使用型号为IC695CBL316的链接电缆和计算机232口通讯。

USB通讯口说明：

该通讯口并不能用来和编程软件或PC机通讯。该口只能和移动存储设备进

行程序的转移。可以下装移动存储设备中的程序，或上传CPU中程序到移动存储设备（例如U盘）中。

电源模块

RX3i的电源模块像I/O一样简单地插在背板上，并且能与任何标准型号RX3i CPU协同工作。每个电源模块具有自动电压适应功能，用户无需跳线选择不同的输入电压。电源模块具有限流功能，发生短路时，电源模块会自动关断来避免硬件损坏。RX3i电源模块与CPU性能紧密结合能实现单机控制、失败安全和容错。其他的性能和安全特性还包括先进的诊断机制和内置智能开关熔丝。 

IC697ALG230 GE 8个输入AI模拟量输入模块
 

Introduction of communication port:

1. Ethernet port (RJ45)

CPE305 This type of CPU Ethernet port is different from other GE PLC Ethernet devices.

Temporary IP is not supported in the ME programming software. The default value of the product is the default IP address:

192.168.0.100 This IP address is used only for the first communication. After the hardware configuration is modified, this IP address becomes invalid.

2.Serial port (RJ-25\RJ-232) Description:

The CPE305 CPU has a serial port, which can be used to communicate with programming software. install

Carry the program. Use the IC695CBL316 link cable to communicate with the 232 port of the computer.

USB communication port description:

This interface cannot be used to communicate with programming software or PCS. This port can only communicate with mobile storage devices

Line program transfer. You can install programs in the mobile storage device or upload programs in the CPU to the mobile storage device (such as a USB flash drive).

Power module

The RX3i's power module simply plugs into the backplane like I/O and works with any standard RX3i CPU. Each power module has an automatic voltage adaptation function, and users do not need to choose different input voltages with jumpers. The power module has the current limiting function. When a short circuit occurs, the power module automatically shuts down to prevent hardware damage. The tight combination of RX3i power module and CPU performance enables single-machine control, failure safety and fault tolerance. Other performance and safety features include an advanced diagnostic mechanism and a built-in smart switching fuse.

IC697ALG230 GE 8个输入AI模拟量输入模块
 

型号推荐

PFSK110/DSPU120/57310001-HG    ABB DCS    XV C723 AE15    PM866AK01/3BSE076939R1    位置检测模块
PFSK110(DSPU120) 57310001-HG    ABB DCS    XV C723 AE14    PM802F/3BDH000002R1 PM592-ETH    通信模块
PFSK102 YM322001-EG    ABB DCS    XV C723 AE12    89NU01C-E GJR2329100R0100    模拟量输入卡件
PFEA113 3BSE028144R0020    ABB DCS    XV C723 AE11    88UM01A GJR2329800R0100    主控制器模块
PFEA111-65    ABB DCS    XV C723 AE02    88FV01E/GJR2332300R0200    张力计控制器
PFBK165 3BSE000470R1    ABB DCS    XV C723 AE06    70VV01A HESG447043R1    机器人主机
PFBK164 3BSE000469R1    ABB DCS    XV C723 AE09    70EA05a-E    综合继电保护装置
PFBI161 3BSE000467R1    ABB DCS    XV C723 AE05    70BV01C-ES HESG447260R1    IGCT模块
PFBI161    ABB DCS    XV C723 AE03    70BT01C HESG447024R    通用变频器
NTMP01    ABB DCS    XV C722 A01    70BA01C-S HESG447260R2    变频器驱动板
NTDI01    ABB DCS    XV C723 AE04    70AB01C-ES HESG447224R2    按健面板按键开关
NTCS04    ABB DCS    XV C723 AE01    70AA02B-E HESG447388R1    变频器控制板
NTAM01    ABB DCS    XV C722 A03    6214BZ10121G    PID温度控制器