IS200ECTBG1A 励磁触点输入和输出

IS200ECTBG1A 励磁触点输入和输出

产品描述



控制器单元IS200ECTBG1A是一个励磁机触点端子板，支持励磁触点输出和输入，该板仅用于冗余模式。该型号有四个由EMIO控制的C型触点输出，并有两个用于客户了望的触点输出。



输入/输出端子板IS200ECTBG1A是EX2100励磁控制器系列的一部分。该板是一个励磁机接触端子板（ECTB）。该模型的主要功能是支持励磁触点输入和输出。由于IS200ECTBG1A被标记为1A，因此它只能在冗余模式下运行。该型号具有控制继电器触点输出和客户触点输入的能力。



IS200ECTBG1A控制板上有四个通用的C型触点输出，当使用该板时，必须将其连接到EMIO，以便可以控制C型输出。在ECTB模型通电期间，将有70的隔离直流电压。在IS200ECTBG板上，有三个引脚连接器，这些连接器标记为J405、J408和J415。

IS200ECTBG1A 励磁触点输入和输出

Product description



The controller unit IS200ECTBG1A is an exciter contact terminal board that supports excitation contact output and input, and is used only in redundancy mode. The model has four Type C contact outputs controlled by EMIO and two contact outputs for customer observation.



The input/output terminal board IS200ECTBG1A is part of the EX2100 excitation controller family. The board is an exciter contact terminal board (ECTB). The main function of this model is to support excitation contact input and output. Since IS200ECTBG1A is marked as 1A, it can only run in redundancy mode. This model has the ability to control relay contact output and customer contact input.



There are four common C-contact outputs on the IS200ECTBG1A control board, and when using the board, it must be connected to EMIO so that the C-output can be controlled. During the electrification of the ECTB model, there will be an isolated DC voltage of 70. On the IS200ECTBG board, there are three pin connectors labeled J405, J408, and J415.

IS200ECTBG1A 励磁触点输入和输出

型号推荐

GE DS3800NGMA    GE Fanuc    卡件    DS200SLCCG3AFG
GE DS3800NGDD    GE Fanuc    卡件    DS200DMCAG1AHC
GE DS3800NGDC    GE Fanuc    卡件    DS200PCCAG7A
GE DS3800NFOA1H    GE Fanuc    卡件    DS200EXDEG1AEA
GE DS3800NFOA1C1D    GE Fanuc    卡件    DS200RTBAG3AFB
GE DS3800NFMC1F1EBOARD    GE Fanuc    卡件    DS200RTBAG3AEB
GE DS3800NFMC1F1E    GE Fanuc    卡件    DS200RTBAG3AHC