1440-RMA00-04RC 模块是 XM ControlNet 适配器模块

1440-RMA00-04RC 模块是 XM ControlNet 适配器模块

Allen-Bradley 1440-RMA00-04RC模块是 XM ControlNet 适配器模块。它通过提供用于在XM总线上控制该模块的接口，用作Allen-Bradley 1440-DYN02-01RJ模块的通信适配器模块。它的主要功能是通过控制网络将数据传输到处理器。它利用这种高速传输网络来通信时间关键型 I/O、联锁数据、消息传递数据，包括在单个物理介质链路上上传和下载编程数据和配置数据。Allen-Bradley 1440-RMA00-04RC XM ControlNet 适配器模块支持的一些功能包括控制 XM 总线上的 I/O、通过将测量模块直接连接到适配器来添加测量模块、用于配置和检索数据的计划外消息传递数据，以及通过网络访问端口 （NAP） 进行本地通信网络访问。

从硬件角度来看，Allen-Bradley1440-RMA00-04RC XM ControlNet 适配器模块具有 4 个状态 LED，用于指示适配器、背板和网络的状态。它还具有两个通道（A 和 B）和用于 BNC 连接的同轴电缆插座，以及用于配置模块节点地址的 ControlNet 节点地址推轮开关。对于外部通信和配置，它提供了一个网络访问端口 （NAP），用作用于维护和 I/O 监视的编程接口。Allen-Bradley 1440-ACNR XM ControlNet 适配器模块需要连接到 24 伏电源，并且由于其开放式结构，它设计为安装在适当保护的外壳内。它不适用于住宅设施，如果在此类环境中使用，可能会受到无线电干扰的影响。

1440-RMA00-04RC 模块是 XM ControlNet 适配器模块

The Allen-Bradley 1440-RMA00-04RC module is an XM ControlNet adapter module. It serves as a communication adapter module for the Allen-Bradley 1440-DYN02-01RJ module by providing an interface for controlling the module on the XM bus. Its main function is to transfer data to the processor through the control network. It utilizes this high-speed transmission network to communicate time-critical I/O, interlocking data, and messaging data, including uploading and downloading programming and configuration data on a single physical media link. Some of the features supported by the Allen-Bradley 1440-RMA00-04RC XM ControlNet adapter module include controlling I/O on the XM bus, adding measurement modules by connecting measurement modules directly to the adapter, unplanned messaging data for configuring and retrieving data, and more. And local communication network access via a Network Access Port (NAP).

From a hardware point of view, the Allen-Bradley1440-RMA00-04RC XM ControlNet adapter module has 4 status leds that indicate the status of the adapter, backplane and network. It also has two channels (A and B) and a coaxial cable socket for BNC connections, as well as a ControlNet node address push-wheel switch for configuring module node addresses. For external communication and configuration, it provides a Network Access port (NAP), which is used as a programming interface for maintenance and I/O monitoring. The Allen-Bradley 1440-ACNR XM ControlNet adapter module needs to be connected to a 24 volt power supply, and because of its open construction, it is designed to be installed in a properly protected housing. It is not suitable for residential facilities and may be subject to radio interference if used in such environments.

1440-RMA00-04RC 模块是 XM ControlNet 适配器模块

型号推荐
DO6603 康吉森    Triconex DCS    数字输入模块
PM6301A 康吉森    Triconex DCS    数字输入模块
DI6503 康吉森    Triconex DCS    数字输入模块
MP6004 康吉森    Triconex DCS    主处理器模块
Triconex 3721 康吉森    Triconex DCS    模拟输入模块
3511 康吉森    Triconex DCS    脉冲输入模块
3625 康吉森    Triconex DCS    24 vdc数字输出模块
3451 康吉森    Triconex DCS    通信模块
9765-210 康吉森    Triconex DCS    控制板终止
4000103-510 康吉森    Triconex DCS    通信模块
3008 康吉森    Triconex DCS    处理器模块
3700 康吉森    Triconex DCS    模拟输入三模冗余32 PT模块