GE DS3800HSCG1D1E 34 个可编程中断控制器

GE DS3800HSCG1D1E 34 个可编程中断控制器

产品描述

GE高 级隔离器板DS3800HSCG1D1E设计用于在驱动器中快速安装。该板的一端有一个模块化连接器，另一端有一个固定杆。GE高 级隔离器板DS1HSCG3800D1E还装有1个跳线和8个微调电阻。该板还配有 1 个带固定杆的 1 针连接器和 34 个可编程中断控制器。

GE 高 级隔离器板DS3800HSCG1D1E仅装有 1 个 34 针连接器，需要您将 34 针带状电缆连接到该连接器。因此，电路板的安装很容易。将电路板滑入机架，然后用拇指将其按入机架以连接模块化连接器。按下固定杆以固定它。

但是，在开始安装之前，必须始终断开驱动器的电源。这要求您知道驱动器如何连接到电源以及如何安全地断开电源。

然后，连接带状电缆。带状电缆必须在驱动器内正确布线。这意味着防止它堵塞驱动器顶部和底部的通风口。底部通风口是冷空气进入驱动器的地方。它通过驱动器组件，并以热空气从顶部的通风口排出驱动器。堵塞通风孔会使驱动器升温，从而导致驱动器自动关闭。自动关机可防止驱动器损坏。为关闭驱动器的温度定义阈值。

GE DS3800HSCG1D1E 34 个可编程中断控制器
Product description

The GE Advanced isolator board DS3800HSCG1D1E is designed for quick installation in drives. The board has a modular connector at one end and a fixed rod at the other end. The GE advanced isolator board DS1HSCG3800D1E also has one jumper and eight trimmer resistors. The board also comes with a 1-pin connector with a fixed rod and 34 programmable interrupt controllers.

The GE Advanced isolator board DS3800HSCG1D1E has only one 34-pin connector and requires you to connect a 34-pin ribbon cable to that connector. Therefore, the installation of the circuit board is easy. Slide the board into the rack, then press it into the rack with your thumb to connect the modular connector. Press down on the retaining lever to secure it.

However, you must always disconnect the power from the drive before starting the installation. This requires that you know how the drive is connected to the power supply and how to disconnect the power supply safely.

Then, connect the ribbon cable. The ribbon cable must be properly routed in the driver. This means preventing it from clogging the vents at the top and bottom of the drive. The bottom vent is where cold air enters the drive. It passes through the drive assembly and vents the drive with hot air from the top. Blocking the vent will heat up the drive, causing it to shut down automatically. Automatic shutdown prevents drive damage. Define a threshold for the temperature at which the drive is turned off.

GE DS3800HSCG1D1E 34 个可编程中断控制器
型号推荐
IS200ERRBG1A    GE Fanuc    通用电气燃机卡件
IS200EROCHIA    GE Fanuc    通用电气燃机卡件
IS200TBAIH1A    GE Fanuc    控制卡件
IS200TBAIH1B    GE Fanuc    控制卡件
IS200TBCIH1BCE    GE Fanuc    通用电气模块
IS200TBCIH1BCD    GE Fanuc    通用电气燃机卡件
IS200TBCIH1BBC    GE Fanuc    通用电气燃机卡件
IS200TBCIH2B    GE Fanuc    通用电气燃机卡件
IS200TBCIH2C    GE Fanuc    通用电气模块
IS200TBTCH1BAA    GE Fanuc    通用电气模块
DS200TCCAF1BDF    GE Fanuc    模拟输入模块
DS200TCCAF1BDE    GE Fanuc    控制卡件