欢迎光临厦门雄霸电子商务有限公司官网!
工控|工业|自动化进口DCS系统 机器人系统 大型伺服系统
全国咨询热线(Zona)18150899970
联系我们
厦门雄霸电子商务有限公司
手机:18150899970
QQ:391038081
邮箱:sales@saulcontrol.com
地址 :福建省厦门市思明区吕岭路1733号2008单元(万科创想中心)
联系人:Zona
您的位置: 首页>>产品展示 >
产品展示 》 GE 》 GE DS3800HSCD1J1G 非隔离输入板 有多个电容器

GE DS3800HSCD1J1G 非隔离输入板 有多个电容器

型号:DS3800HSCD1J1G

GE DS3800HSCD1J1G 非隔离输入板 有多个电容器

品牌 GE 加工定制 否 10/100BaseT(X)端口 5/8/24/4/4 100Base-FX 端口 2 光纤模式 MM - 多模 SS- 单模 以太网标准 IEEE 802.3: 10Base-T

GE DS3800HSCD1J1G 非隔离输入板 有多个电容器

产品描述

GE高 级非隔离输入板DS3800HSCD1J1G一端采用模块化连接器,另一端采用固定杆。该板装有多个电容器。该板装有多个晶体管-晶体管逻辑器件。GE 高 级非隔离输入板DS1HSCD3800J1G还装有 1 个红色指示灯 LED 和 16 个琥珀色指示灯 LED。该板还具有 1 个用于电可擦除可编程只读存储器 (EEPROM) 模块的插座。该板还装有 1 个微调电阻器。

为了使GE高 级非隔离输入板DS3800HSCD1J1G正常工作,必须将其安装在机架中,以便板可以接收电流,通过模块化连接器为板供电。还必须连接它,以便它可以发送和接收控制信号。电流和控制信号通过位于电路板上的模块化连接器传输。另一个模块化连接器位于主板机架中。模块化连接器相遇以建立物理连接。

电路板上的固定杆固定电路板并确保模块化连接器保持连接状态。要固定主板,请在打开位置握住固定杆,然后将其滑入机架。防止主板撞击驱动器中的其他组件。这可能会使组件从板上掉下来或损坏组件。它可能会断开组件和电缆。

GE DS3800HSCD1J1G 非隔离输入板  有多个电容器

GE DS3800HSCD1J1G 非隔离输入板 有多个电容器
Product description

The GE Advanced non-isolated input board DS3800HSCD1J1G uses a modular connector at one end and a fixed rod at the other end. The plate is equipped with a plurality of capacitors. The board is equipped with a plurality of transistor-transistor logic devices. The GE Advanced non-isolated input board DS1HSCD3800J1G also has 1 red indicator LED and 16 amber indicator LED. The board also has a socket for an electrically erasable programmable read-only memory (EEPROM) module. The board is also equipped with a trimmer resistor.

In order for the GE Advanced non-isolated input board DS3800HSCD1J1G to function properly, it must be mounted in a rack so that the board can receive current and power the board through a modular connector. It must also be connected so that it can send and receive control signals. The current and control signals are transmitted via modular connectors located on the circuit board. Another modular connector is located in the motherboard rack. Modular connectors meet to establish a physical connection. A holding rod on the board holds the board in place and ensures that the modular connectors remain connected. To secure the motherboard, hold the retaining rod in the open position and slide it into the rack. Prevents the motherboard from hitting other components in the drive. This can cause the component to fall off the board or damage the component. It may disconnect components and cables.

GE DS3800HSCD1J1G 非隔离输入板  有多个电容器

GE DS3800HSCD1J1G 非隔离输入板 有多个电容器
型号推荐
IS200ERRBG1A    GE Fanuc    通用电气燃机卡件
IS200EROCHIA    GE Fanuc    通用电气燃机卡件
IS200TBAIH1A    GE Fanuc    控制卡件
IS200TBAIH1B    GE Fanuc    控制卡件
IS200TBCIH1BCE    GE Fanuc    通用电气模块
IS200TBCIH1BCD    GE Fanuc    通用电气燃机卡件
IS200TBCIH1BBC    GE Fanuc    通用电气燃机卡件
IS200TBCIH2B    GE Fanuc    通用电气燃机卡件
IS200TBCIH2C    GE Fanuc    通用电气模块
IS200TBTCH1BAA    GE Fanuc    通用电气模块
DS200TCCAF1BDF    GE Fanuc    模拟输入模块
DS200TCCAF1BDE    GE Fanuc    控制卡件
GE DS3800HSCD1J1G 非隔离输入板  有多个电容器

在线客服
联系方式

热线电话

18150899970

邮箱

sales@saulcontrol.com

上班时间

周一到周五

微信
WhatsApp
线