欢迎光临厦门雄霸电子商务有限公司官网!
工控|工业|自动化进口DCS系统 机器人系统 大型伺服系统
全国咨询热线(Sunny)18059884797
联系我们
厦门雄霸电子商务有限公司
手机:18059884797
QQ:3095989363
邮箱:xiongbagk@gmail.com
地址 :福建省厦门市思明区吕岭路1733号2008单元(万科创想中心)
联系人:Sunny
您的位置: 首页>>产品展示 >
产品展示 》 GE 》 IS200TBTCH1C GE 模拟电压源输出模块 全系列

IS200TBTCH1C GE 模拟电压源输出模块 全系列

型号:IS200TBTCH1C

IS200TBTCH1C GE 模拟电压源输出模块 全系列

品牌 GE 规格 常规 颜色 标准色 特点 可靠性高 加工定制 否 物料编码 210810596481333 输出频率 50Hz 系统环境 耐高温 系统能力 自动

IS200TBTCH1C GE  模拟电压源输出模块 全系列

产品描述

热电偶输入 (TBTC) 端子板IS200TBTCH1C是通用电气生产的 Mark VIe 系列的一部分。该板将接受 T、S、K、J 和 E 主 2 英寸热电偶输入。如果该板与单工系统中的 PTCCH200 板一起使用,则该板可以接受标记为 R、B 和 N 的额外三个热电偶输入。有两种 TBTC 型号,该型号是IS1TBTCH<>C表示它有两个 DC 型连接器,并且仅用于单工应用。该板将使用两个PTCC封装,因此允许<>个输入。

当将 IS200TBTCH1C 板作为 Mark VIe 系列的一部分连接时,所使用的 I/O 包将直接校正到 TBTC J 型连接器中,所需的电缆也将取决于板所需的冗余级别。该板的一个特点是该板上的热电偶输入可以不接地或接地。 输入端距离涡轮机控制面板zui远可达 <> 英尺。此设备上连接的 I/O 处理器将对各个热电偶输入执行模数线性化和转换。

IS200TBTCH1C板的热电偶输入可以支持从负 <> 伏到高达 <> 伏的正输入范围的宽输入范围。该板具有冷端,其工作范围为负 <> 度至 <> 华氏度。冷端或CJ信号可通过进入信号空间进行监测。

 

 IS200TBTCH1C GE  模拟电压源输出模块 全系列

IS200TBTCH1C GE  模拟电压源输出模块 全系列

Product description

The Thermocouple Input (TBTC) terminal board IS200TBTCH1C is part of the Mark VIe series produced by General Electric. The board will accept T, S, K, J, and E main 2-inch thermocouple inputs. If the board is used with a PTCCH200 board in a simplex system, the board can accept three additional thermocouple inputs labeled R, B, and N. There are two TBTC models, the model is IS1TBTCH<>C meaning it has two DC type connectors and is only used for simplex applications. The board will use two PTCC packages, thus allowing <> input.

When connecting the IS200TBTCH1C board as part of the Mark VIe series, the I/O packages used will be corrected directly into the TBTC Type J connector, and the cables required will also depend on the level of redundancy required for the board. A feature of the board is that the thermocouple input on the board can be ungrounded or grounded. The input is up to <> feet from the turbine control panel. The connected I/O processor on this device performs analog-digital linearization and conversion of the individual thermocouple inputs.

The thermocouple input of the IS200TBTCH1C board can support a wide input range from negative <> volts to a positive input range of up to <> volts. The plate has a cold end and its operating range is negative <> degrees to <> degrees Fahrenheit. Cold end or CJ signals can be monitored by entering the signal space.

IS200TBTCH1C GE  模拟电压源输出模块 全系列

IS200TBTCH1C GE  模拟电压源输出模块 全系列

型号推荐
DS200TCCAF1BDD    GE Fanuc    数字输入模块
DS200TCCAF1BDB    GE Fanuc    卡件模块
DS200TCCAF1ADD    GE Fanuc    卡件模块
DS200TCCAF1ADC    GE Fanuc    通用电气模块
DS200TCCAF1ADA    GE Fanuc    通用电气燃机卡件
DS200TCCAF1ACF    GE Fanuc    通用电气模块
DS200TCCAF1ACE    GE Fanuc    通用电气模块
DS200TCCAF1ACC    GE Fanuc    通用电气燃机卡件
DS200TBSAG1A    GE Fanuc    通用电气燃机卡件
DS200TBQGG2A    GE Fanuc    通用电气燃机卡件
DS200TBQGG1A    GE Fanuc    通用电气模块
DS200TBQFG1A    GE Fanuc    通用电气模块
DS200TBQEG1B    GE Fanuc    通用电气燃机卡件
DS200TBQDG1A    GE Fanuc    通用电气模块
IS200TBTCH1C GE  模拟电压源输出模块 全系列

在线客服
联系方式

热线电话

18059884797

邮箱

xiongbagk@gmail.com

上班时间

周一到周五

微信
WhatsApp
线