GE DS3800HLND1B1B 接收板 模块化连接用于连接到驱动

GE DS3800HLND1B1B 接收板 模块化连接用于连接到驱动

GE 网络控制器板 DS3800HLND1B1B 专为在驱动器中快速安装而设计。该板的一端有一个模块化连接器，另一端有固定杆。GE 网络控制器板 DS3800HLND1B1B 还装有 3 个红色 LED 指示灯，从板的正面可以看到。该板还具有 8 个跳线和 1 个可擦除可编程只读存储器 (EPROM) 模块。

GE 网络控制器板 DS3800HLND 还配备了 1 个 40 针连接器和 1 个 20 针连接器。安装电路板时，电路板安装的zui后一项任务是将带状电缆连接到连接器。这是因为当电路板安装在电路板机架中时，连接器是可以接触到的。安装电路板时，电路板上和电路板机架上的模块化连接器相遇并连接。它们提供用于为电路板供电的电流的连接。它们还可以让电路板接收命令信号。模块化连接器提供了将信号传输到其他板的方法。

40 针和 20 针连接器还可以发送和接收信号。连接器通过连接到组件的带状电缆连接到其他组件。带状电缆必须正确布线。使带状电缆远离驱动器中的任何电源线。电源线会发出干扰带状电缆中信号的信号。zui佳做法是将所有电源线穿过驱动器中的端口并远离带状电缆。

GE DS3800HLND1B1B 接收板 模块化连接用于连接到驱动

The GE Network controller board DS3800HLND1B1B is designed for quick installation in drives. The board has a modular connector at one end and a fixed rod at the other end. The GE network controller board DS3800HLND1B1B is also equipped with three red LED indicators that can be seen from the front of the board. The board also features eight jumpers and an erasable programmable read-only memory (EPROM) module.

The GE Network controller board DS3800HLND is also equipped with a 40-pin connector and a 20-pin connector. When installing the circuit board, the final task of the board installation is to connect the ribbon cable to the connector. This is because the connectors are accessible when the board is mounted in the board rack. When the circuit board is installed, modular connectors on the circuit board and on the circuit board rack meet and connect. They provide connections for the current used to power the circuit board. They also allow the board to receive command signals. Modular connectors provide a way to transmit signals to other boards.

40-pin and 20-pin connectors can also send and receive signals. Connectors are connected to other components by a ribbon cable that connects to the component. The ribbon cable must be properly routed. Keep the ribbon cable away from any power cords in the drive. The power cord emits signals that interfere with the signal in the ribbon cable. The best practice is to run all power cables through the ports in the drive and away from the ribbon cable.

GE DS3800HLND1B1B 接收板 模块化连接用于连接到驱动

型号推荐
ABB DCS     LWN1902-6E 贝尔 交流/直流转换器      ABB TK457V050
ABB DCS     LWN1702-6E 贝尔 交流/直流转换器       ABB DSRF197K01
ABB DCS     LWN1801-6E 贝尔 交流/直流转换器 49.4V 250W    3BHE039203R0101
ABB DCS     LWN1902-6EG 贝尔 交流/直流转换器     3BHB004027R0101
ABB DCS     LWN1701-6EG 贝尔 交流/直流转换器 37V 250W     3BHB003154R0101
ABB DCS     LWN1601-6EG 贝尔 交流/直流转换器 24.7V 250W     ABB PM864AK01-EA
ABB DCS     LWN1601-6ER 贝尔 交流/直流转换器      ABB CI868K01-EA
ABB DCS     LWN1801-6EG 贝尔 交流/直流转换器 49.4V 250W    ABB 5SHY35L4520
ABB DCS     LWN1301-6EG 贝尔 交流/直流转换器 12.35V 250W    ABB UNS0119A-P V101
ABB DCS     LWN1601-6EC1 贝尔 导轨式 247W 24.7V    ABB GVC736CE101
ABB DCS     LWN1701-6EM1 贝尔 交流/直流转换器      ABB GFD212A
ABB DCS     LWN1601-6EM2 贝尔 交流/直流转换器    ABB 5SHX1445H0001
ABB DCS     LWN1140-6EM1 贝尔 DIN 导轨 194W 13.8V 电池充电器    ABB PP836
ABB DCS     LWN1740-6EM1 贝尔 DIN 导轨 230W 51.36V 电池充电器    ABB 5SDF0860H0003
ABB DCS     LWN1601-6EK2 贝尔 电源 250W 24V DIN 导轨    ABB 5SDD1060F0001