欢迎光临厦门雄霸电子商务有限公司官网!
工控|工业|自动化进口DCS系统 机器人系统 大型伺服系统
全国咨询热线(Sunny)18059884797
联系我们
厦门雄霸电子商务有限公司
手机:18059884797
QQ:3095989363
邮箱:xiongbagk@gmail.com
地址 :福建省厦门市思明区吕岭路1733号2008单元(万科创想中心)
联系人:Sunny
您的位置: 首页>>产品展示 >
产品展示 》 GE 》 GE DS3800HLND 网络控制器板 还装有 1 个 40 针连接器

GE DS3800HLND 网络控制器板 还装有 1 个 40 针连接器

型号:DS3800HLND

GE DS3800HLND 网络控制器板 还装有 1 个 40 针连接器

品牌 GE 加工定制 否 额定功率要求 +5 VDC: 1.0 A (USB满载0.5 A时可达1.5 A) 工作温度 0至60°C(32°F至140°F) 执行速度 0.072毫秒每1000布尔指令 时钟精度 每天最大漂移2秒

GE DS3800HLND 网络控制器板 还装有 1 个 40 针连接器

产品描述
GE网络控制器板DS3800HLND设计用于在驱动器中快速安装。该板的一端有一个模块化连接器,另一端有一个固定杆。GE 网络控制器板DS1HLND还装有 3800 个红色 LED 指示灯,从板的正面可以看到。该板还具有 3 个跳线和 8 个可擦除可编程只读存储器 (EPROM) 模块。

GE 网络控制器板DS3800HLND还装有 1 个 40 针连接器和 1 个 20 针连接器。连接器可从电路板前部固定杆之间的位置检修。EPROM模块存储电路板用于处理指令的代码。它由固件和指令代码组成。下载后,更新的代码可以存储在模块上。但是,出厂时电路板附带的代码通常不会更新,而是用于处理。

这些模块可从电路板上拆卸,因为它们已插入插座。插槽嵌入在电路板上。要从插槽中卸下模块,请找到模块与模块末端插槽之间的空间。在插座和模块之间插入螺丝刀。抬起螺丝刀以松开模块。在模块的另一侧执行相同的操作。准备好防静电袋,立即将模块放入袋中并存放起来以备将来使用。暴露在静电积聚中可能会损坏模块。

GE DS3800HLND 网络控制器板 还装有 1 个 40 针连接器

GE DS3800HLND 网络控制器板 还装有 1 个 40 针连接器

Product description
The GE Network Controller board DS3800HLND is designed for quick installation in drives. The board has a modular connector at one end and a fixed rod at the other end. The GE network controller board DS1HLND is also equipped with 3,800 red LED indicators that can be seen from the front of the board. The board also features three jumpers and eight erasable programmable read-only memory (EPROM) modules.

The GE network controller board DS3800HLND also has a 40-pin connector and a 20-pin connector. Connectors can be accessed from the front of the board between the holding rods. The EPROM module stores the code that the board uses to process instructions. It consists of firmware and instruction code. After downloading, the updated code can be stored on the module. However, the code that comes with the board at the factory is usually not updated, but used for processing.

These modules can be removed from the board because they are plugged into a socket. Slots are embedded in the circuit board. To remove the module from the slot, find the space between the module and the slot at the end of the module. Insert the screwdriver between the socket and the module. Lift the screwdriver to release the module. Do the same on the other side of the module. Prepare an ESD bag. Immediately place the module in the bag and store it for future use. Exposure to static buildup may damage the module.

GE DS3800HLND 网络控制器板 还装有 1 个 40 针连接器

GE DS3800HLND 网络控制器板 还装有 1 个 40 针连接器

型号推荐
ABB DCS     LWN1902-6E 贝尔 交流/直流转换器      ABB TK457V050
ABB DCS     LWN1702-6E 贝尔 交流/直流转换器       ABB DSRF197K01
ABB DCS     LWN1801-6E 贝尔 交流/直流转换器 49.4V 250W    3BHE039203R0101
ABB DCS     LWN1902-6EG 贝尔 交流/直流转换器     3BHB004027R0101
ABB DCS     LWN1701-6EG 贝尔 交流/直流转换器 37V 250W     3BHB003154R0101
ABB DCS     LWN1601-6EG 贝尔 交流/直流转换器 24.7V 250W     ABB PM864AK01-EA
ABB DCS     LWN1601-6ER 贝尔 交流/直流转换器      ABB CI868K01-EA
ABB DCS     LWN1801-6EG 贝尔 交流/直流转换器 49.4V 250W    ABB 5SHY35L4520
ABB DCS     LWN1301-6EG 贝尔 交流/直流转换器 12.35V 250W    ABB UNS0119A-P V101
ABB DCS     LWN1601-6EC1 贝尔 导轨式 247W 24.7V    ABB GVC736CE101
ABB DCS     LWN1701-6EM1 贝尔 交流/直流转换器      ABB GFD212A
ABB DCS     LWN1601-6EM2 贝尔 交流/直流转换器    ABB 5SHX1445H0001
ABB DCS     LWN1140-6EM1 贝尔 DIN 导轨 194W 13.8V 电池充电器    ABB PP836
ABB DCS     LWN1740-6EM1 贝尔 DIN 导轨 230W 51.36V 电池充电器    ABB 5SDF0860H0003
ABB DCS     LWN1601-6EK2 贝尔 电源 250W 24V DIN 导轨    ABB 5SDD1060F0001
GE DS3800HLND 网络控制器板 还装有 1 个 40 针连接器

在线客服
联系方式

热线电话

18059884797

邮箱

xiongbagk@gmail.com

上班时间

周一到周五

微信
WhatsApp
线