GE DS3800HLNC1A1A 网络控制板 用于快速安装在驱动器中

GE DS3800HLNC1A1A 网络控制板 用于快速安装在驱动器中

GE 网络控制板 DS3800HLNC1A1A 专为在驱动器中快速安装而设计。该板的一端有一个模块化连接器，另一端有固定杆。该板在固定杆之间装有 1 个 40 针连接器。GE 网络控制板 DS3800HLNC1A1A 还装有微处理器和 1 个琥珀色 LED 指示灯。该板还装有 8 个用于电可擦可编程只读存储器 (EEPROM) 模块的插槽和 21 个跳线。

如果发现有缺陷，可以更换 GE 网络控制板 DS3800HLNC1A1A。当您收到替换板时，您会发现 EEPROM 插槽是空的。这是预料之中的，因为通常的做法是从有缺陷的板上卸下模块并将它们安装在更换板上。在正常操作期间，板上的微处理器使用存储在模块上的固件和其他指令代码来处理控制信号。固件和指令代码被重复使用，固件和指令代码永远不会改变。这意味着代码永远不会改变，处理也永远不会改变。

为确保新板的处理不发生变化，请使用相同的固件和指令代码。考虑到模块很容易被静电损坏。为防止损坏，请在处理模块时佩戴腕带。插座在模块和插座之间提供了一个插槽，您可以在其中插入螺丝刀。上下移动螺丝刀刀片以卸下模块。在插座的另一侧重复此操作。

GE DS3800HLNC1A1A 网络控制板 用于快速安装在驱动器中

The GE Network Control board DS3800HLNC1A1A is designed for quick installation in a drive. The board has a modular connector at one end and a fixed rod at the other end. The board is fitted with a 40-pin connector between the fixed rods. The GE network control board DS3800HLNC1A1A also has a microprocessor and an amber LED indicator. The board also has eight slots for electrically erasable programmable read-only memory (EEPROM) modules and 21 jumpers.

If the DS3800HLNC1A1A is faulty, replace the DS3800HLNC1A1A. When you receive the replacement board, you will find that the EEPROM slot is empty. This is to be expected, as it is common practice to remove modules from defective boards and install them on replacement boards. During normal operation, the microprocessor on the board uses firmware and other instruction codes stored on the module to process control signals. The firmware and instruction code are reused, and the firmware and instruction code never change. This means that the code will never change and the processing will never change.

To ensure that the handling of the new board does not change, use the same firmware and instruction code. Consider that modules are easily damaged by static electricity. To prevent damage, wear a wrist strap when handling the module. The socket provides a slot between the module and the socket where you can insert a screwdriver. Move the screwdriver blade up and down to remove the module. Repeat on the other side of the socket.

GE DS3800HLNC1A1A 网络控制板 用于快速安装在驱动器中

型号推荐
ABB DCS     LWN1140-6EM1G 贝尔 DIN 导轨浮动充电器 250W 12V     ABB PM860K01
ABB DCS     LWN1240-6EM1G 贝尔 DIN 导轨浮动充电器 250W 24V    ABB TU830V1
ABB DCS     LWN1740-6EM1G 贝尔 DIN 导轨浮动充电器 250W 48V     ABB PPC907BE101
ABB DCS     LWN1601-6EM2K 贝尔 电源 250W 24V DIN 导轨       ABB LDSYN-101
ABB DCS     LWN1701-6ERK2 贝尔 电源 250W 36V DIN 导轨       ABB UAC383AE01
ABB DCS     LWN1240-6EM1K2 贝尔 DIN 导轨浮动充电器 250W 24V     3HAC17484-8108
ABB DCS     LWN1691-6D1K2C3 贝尔 交流/直流转换器     ABB PFTL101A 1.0KN
ABB DCS    3BDH000384R0005 AO 723F模拟输出模块    ABB DSDO115A
ABB DCS    3BDH000396R0005 CI 741F PROFIBUS接口模块    ABB 216DB61
ABB DCS    3BDH000375R0005 DC 732F数字输入/输出模块    ABB 216AB61
ABB DCS    3BDH000383R0005 DX 722F数字输入/输出模块    ABB 07KT97H3
ABB DCS    3BDH000387R0005 DX 731F数字输入/输出模块    3BHB003387R0101
ABB DCS    3BDH000371R0005 DA 701F数字/模拟模块    ABB RET650
ABB DCS    3BE066485R1 PM 851AK01处理器单元-24MHz和12 MB    ABB C310/0020/STD