GE DS3800HLCA1C1D 印刷电路板 具有几个小电容器

GE DS3800HLCA1C1D 印刷电路板 具有几个小电容器

产品描述

通用电气创建了 DS3800HLCA1C1D PCB（印刷电路板）作为其 Speedtronic Mark IV 蒸汽和燃气轮机控制系统的组件。Mark IV 通过利用受控故障/恢复技术和有意冗余的力量，zui大限度地减少停机时间。当 Mark IV 系统中的一个 PCB 出现问题时，其职责将转移到其他电路板上，直到可以修复并重新投入使用。

DS3800HLCA1C1D在其顶部边缘标记为对齐。它还标记为 6DA03 和 6BA0。它的所有四个角都经过钻孔。DS3800HLCA1C1D上的一些组件包括：

两个拨动开关。电路板上有一个测试开关 （A4627P5），带有三个直角插脚，一个复位开关 （A4627PII） 连接到电路板上，带有六个直角插脚。两个开关的zui大额定电流均为 0.4 VA。

三个跳线开关

1 个 LED（红色）标记测试

四个电位计或可调分压器。它们被标记为“Hgn”、“Hos”、“Lgn”和“Os”。

12 个 TP 测试点。这些都是单独标记的。

三个电阻网络，可用于模数转换，或用作分压器。

集成电路（超过 35 个），包括两个可编程接口、DIP、EPROM 和振荡器。

一个大型 AMD 218A4553-1 连接器。

该DS3800HLCA1C1D具有几个小电容器，它们以不同的间隔分布在电路板上。电阻器主要是陶瓷金属膜电阻器。

GE DS3800HLCA1C1D 印刷电路板 具有几个小电容器
 

Product description

Ge created the DS3800HLCA1C1D PCB (printed circuit board) as a component of its Speedtronic Mark IV steam and gas turbine control system. The Mark IV minimizes downtime by harnessing the power of controlled failure/recovery techniques and intentional redundancy. When there is a problem with one PCB in the Mark IV system, its responsibilities are transferred to the other boards until they can be repaired and put back into service.

DS3800HLCA1C1D is marked aligned on its top edge. It is also labeled 6DA03 and 6BA0. All four corners of it are drilled. Some of the components on DS3800HLCA1C1D include:

Two toggle switches. The board has a test switch (A4627P5) with three right Angle pins, and a reset switch (A4627PII) connected to the board with six right Angle pins. The maximum rated current of both switches is 0.4 VA.

Three jumper switches

1 LED (red) marker test

Four potentiometers or adjustable dividers. They are labeled "Hgn," "Hos," "Lgn," and "Os."

12 TP test points. These are individually labeled.

Three resistor networks that can be used for analog-to-digital conversion or as voltage dividers.

Integrated circuits (more than 35) including two programmable interfaces, DIP, EPROM and oscillator.

A large AMD 218A4553-1 connector.

The DS3800HLCA1C1D has several small capacitors, which are distributed at different intervals on the circuit board. Resistors are mainly ceramic metal film resistors.

GE DS3800HLCA1C1D 印刷电路板 具有几个小电容器

主要产品

PLC模块，可编程控制器，CPU模块，IO模块，DO模块，AI模块，DI模块，网通信模块，
以太网模块，运动控制模块，模拟量输入模块，模拟量输出模块，数字输入模块，数字输出
模块，冗余模块，电源模块，继电器输出模块，继电器输入模块，处理器模块


型号推荐

BENTLY 125840-01 3500/15小卡    控制I/O模块
BENTLY 135489-03 3500/42M小卡    数字量输出子模件
BENTLY 135489-01 3500/42M小卡    多功能控制器
BENTLY 330130-045-00-00    数字量输入子模件
BENTLY 3500/25    控制输入输出子模件
BENTLY 149992-01 3500/33小卡    模拟量输入子模件
BENTLY 3500/34    DCS控制器模块
BENTLY 146031-01    模拟量输出子模件
BENTLY 1900/27    隔离模拟信号输入模件
BENTLY 3500/50    变频器触发板
BENTLY 3500/33    I/O扩展接口板
BENTLY 1900/65A    励磁通讯适配器
BENTLY 3500-20-01    通用电气模块
BENTLY 3500-20-01    以太网模块
BENTLY 35001513330001    火检处理器
BENTLY 35001513329201    测量板
BENTLY 3500151276100110    机器人配件
BENTLY 3500151276100100    板卡
BENTLY 35001512761001    开关量输入模块
BENTLY 3500151258400100    功率电源驱动板