GE DS3800HITA1F1F 印刷电路板 工控备件

GE DS3800HITA1F1F 印刷电路板 工控备件

DS3800HITA1F1F 是 GE 的印刷电路板。DS3800HITA1F1F 设计为 Speedtronic Mark IV 燃气和蒸汽轮机控制系统的组成部分。Mark IV 设计有意在芯片组之间构建冗余，以提高可靠性并“内置”受控故障/恢复系统。这样可以zui大限度地减少因电子设备故障导致的停机时间，并zui大限度地延长运行时间。

DS3800HITA1F1F 有 34 个集成电路，包括 EPROM、DIP 元件和振荡器。它有七个跳线开关，允许用户在 A/B、开、关和短、长之间进行选择。该电路板装有多个小电容器以及不同值的金属膜电阻器。

DS3800HITA1F1F 已在所有四个角上进行工厂钻孔。它已使用字母（A 到 J）和沿其顶部边缘的三角形标记进行对齐标记。代码 6DA03 和 6BA06 出现在其底部边缘。

DS3800HITA1F1F 的右上边缘设计有九个 LED。其中八个编号为 (0-7)，一个标记为“Imok”。编号的 LED 为红色，另一个 LED 为琥珀色。LED 下方有一排测试点。这些编号为 (1- 7) 或标记为：tp8-ox.tp9-va.tp10-vb.tp11-vc.tp12-out0.tp13-out1.tp14-out2.tp15-dcom.

DS3800HITA1F1F 有 4 个电阻网络阵列。它的一侧有一个长 AMP 连接器 (218A4553-1)。

GE DS3800HITA1F1F 印刷电路板 工控备件
 

The DS3800HITA1F1F is a GE printed circuit board. The DS3800HITA1F1F is designed as part of the Speedtronic Mark IV gas and steam turbine control system. The Mark IV design intentionally builds redundancy between chipsets to improve reliability and "built-in" controlled failure/recovery systems. This minimizes downtime due to electronic equipment failures and maximizes uptime.

The DS3800HITA1F1F has 34 integrated circuits, including EPROMs, DIP elements and oscillators. It has seven jumper switches that allow users to choose between A/B, on, off, and short and long. The circuit board is equipped with several small capacitors and metal film resistors of different values.

The DS3800HITA1F1F has been factory drilled on all four corners. It has been aligned with the letters (A through J) and the triangle marks along its top edge. The codes 6DA03 and 6BA06 appear on its bottom edge.

The DS3800HITA1F1F is designed with nine leds on the top right edge. Eight of them are numbered (0-7) and one is labeled "Imok". The numbered LED is red and the other LED is amber. There is a row of test points below the LED. These are numbered (1-7) or labeled: tp8-ox.tp9-va.tp10-vb.tp11-vc.tp12-out0.tp13-out1.tp14-out2.tp15-dcom.

The DS3800HITA1F1F has 4 resistance network arrays. It has a long AMP connector (218A4553-1) on one side.

GE DS3800HITA1F1F 印刷电路板 工控备件

主要产品

PLC模块，可编程控制器，CPU模块，IO模块，DO模块，AI模块，DI模块，网通信模块，
以太网模块，运动控制模块，模拟量输入模块，模拟量输出模块，数字输入模块，数字输出
模块，冗余模块，电源模块，继电器输出模块，继电器输入模块，处理器模块


型号推荐

BENTLY 125840-01 3500/15小卡    控制I/O模块
BENTLY 135489-03 3500/42M小卡    数字量输出子模件
BENTLY 135489-01 3500/42M小卡    多功能控制器
BENTLY 330130-045-00-00    数字量输入子模件
BENTLY 3500/25    控制输入输出子模件
BENTLY 149992-01 3500/33小卡    模拟量输入子模件
BENTLY 3500/34    DCS控制器模块
BENTLY 146031-01    模拟量输出子模件
BENTLY 1900/27    隔离模拟信号输入模件
BENTLY 3500/50    变频器触发板
BENTLY 3500/33    I/O扩展接口板
BENTLY 1900/65A    励磁通讯适配器
BENTLY 3500-20-01    通用电气模块
BENTLY 3500-20-01    以太网模块
BENTLY 35001513330001    火检处理器
BENTLY 35001513329201    测量板
BENTLY 3500151276100110    机器人配件
BENTLY 3500151276100100    板卡
BENTLY 35001512761001    开关量输入模块
BENTLY 3500151258400100    功率电源驱动板