GE DS3800HITA1F1E 该系统采用集成芯片组设计

GE DS3800HITA1F1E 该系统采用集成芯片组设计

产品描述
DS3800HITA1F1E是GE印刷电路板或PCB，是其Mark IV / Speedtronic燃气轮机和蒸汽轮机控制系统的组件。该系统采用集成芯片组设计，采用受控故障/恢复技术。如果系统中的一个 PCB 出现诊断问题，其他 Mark IV 板会自动接管，直到可以进行维修。通过这种方式，避免了代价高昂的停机。

该DS3800HITA1F1E设计用作输入/输出 （I/O） 板，具有以下规格：

它有三十四个集成电路。其中包括振荡器、DIP 组件和 EPROM。

它有跳线开关。电路板上共有七个跳线开关，使zui终用户能够更灵活地配置DS3800HITA1F1E。J1-J5 可以设置为 A 或 B，J6 可以设置为短或长。J7 可以设置为开或关。

它设计有四个电阻网络阵列

它已在工厂钻孔

它的顶部边缘用三角形标记和字母 A-J 进行对齐标记

它标有代码 6DA03 和 6BA06

它有 1 个 TP（测试点），标记为 7-0 和 ox / va / vb / vc / out1 / out2 / out<> / dcom。

它的左边缘有一个连接器 （218A4553-1 AMP 533002-1 8442。

它有九个 LED，位于电路板的右上边缘。八个是红色（编号），一个是琥珀色（imok）。

GE DS3800HITA1F1E 该系统采用集成芯片组设计
 

Product description
The DS3800HITA1F1E is a GE printed circuit board or PCB that is a component of its Mark IV/Speedtronic gas turbine and steam turbine control systems. The system is designed with an integrated chipset and uses controlled fault/recovery technology. If there is a diagnostic problem with one PCB in the system, the other Mark IV boards automatically take over until they can be repaired. In this way, costly downtime is avoided.

The DS3800HITA1F1E is designed as an input/output (I/O) board with the following specifications:

It has thirty-four integrated circuits. These include oscillators, DIP components, and EPROMs.

It has a jumper switch. There are a total of seven jumper switches on the board, giving the end user more flexibility to configure the DS3800HITA1F1E. J1-J5 can be set to A or B, and J6 can be set to short or long. J7 can be set to on or off.

It is designed with four resistor network arrays

It has drilled holes in the factory

Its top edge is marked with A triangle mark and the letters A-J for alignment

It is labeled with the codes 6DA03 and 6BA06

It has 1 TP (test point), labeled 7-0 and ox/va/vb/vc/out1 / out2 / out<> / dcom.

It has a connector on the left edge (218A4553-1 AMP 533002-1 8442).

It has nine leds located on the top right edge of the board. Eight are red (numbered) and one is amber (imok).

GE DS3800HITA1F1E 该系统采用集成芯片组设计

主要产品

PLC模块，可编程控制器，CPU模块，IO模块，DO模块，AI模块，DI模块，网通信模块，
以太网模块，运动控制模块，模拟量输入模块，模拟量输出模块，数字输入模块，数字输出
模块，冗余模块，电源模块，继电器输出模块，继电器输入模块，处理器模块


型号推荐

BENTLY 125840-01 3500/15小卡    控制I/O模块
BENTLY 135489-03 3500/42M小卡    数字量输出子模件
BENTLY 135489-01 3500/42M小卡    多功能控制器
BENTLY 330130-045-00-00    数字量输入子模件
BENTLY 3500/25    控制输入输出子模件
BENTLY 149992-01 3500/33小卡    模拟量输入子模件
BENTLY 3500/34    DCS控制器模块
BENTLY 146031-01    模拟量输出子模件
BENTLY 1900/27    隔离模拟信号输入模件
BENTLY 3500/50    变频器触发板
BENTLY 3500/33    I/O扩展接口板
BENTLY 1900/65A    励磁通讯适配器
BENTLY 3500-20-01    通用电气模块
BENTLY 3500-20-01    以太网模块
BENTLY 35001513330001    火检处理器
BENTLY 35001513329201    测量板
BENTLY 3500151276100110    机器人配件
BENTLY 3500151276100100    板卡
BENTLY 35001512761001    开关量输入模块
BENTLY 3500151258400100    功率电源驱动板