GE 数字I/O板 DS3800HIOD1G1G 用于快速安装在驱动器中

GE 数字I/O板 DS3800HIOD1G1G 用于快速安装在驱动器中

GE 数字 I/O 板 DS3800HIOD1G1G 专为在驱动器中快速安装而设计。该板的一端有一个模块化连接器，另一端有固定杆。GE 数字 I/O 板 DS3800HIOD1G1G 还装有 2 个 10 针连接器和 1 个 40 针连接器，位于固定杆之间，可从板的正面进行操作。它还装有 6 个跳线。

GE 数字 I/O 板 DS3800HIOD1G1G 安装在需要某些特定环境考虑的驱动器中。驱动器必须安装在凉爽且有清洁空气供应的位置。该位置必须有足够的电力供应。在某些环境中，安装发生在与其他产生热量的设备所在的房间内。如果是这种情况，您可以减少房间内的驱动器和其他设备的数量以减少热量。您还可以添加风扇以保持驱动器周围的空气流动并防止热量积聚。使用安装在墙上的大功率工业风扇。确保它们处于良好状态，并且安装了足够的它们以移动空气并减少热量积聚。

如果空气中的灰尘和污垢是一个问题，请在设备上方安装罩子以吸走灰尘和污垢。污染物可以从该区域排出以保持空气清洁。

GE 数字I/O板 DS3800HIOD1G1G 用于快速安装在驱动器中
 

The GE digital I/O board DS3800HIOD1G1G is designed for quick installation in drives. The board has a modular connector at one end and a fixed rod at the other end. The GE digital I/O board DS3800HIOD1G1G also has two 10-pin connectors and one 40-pin connector, located between the retaining rods, and can be operated from the front of the board. It also has six jumpers.

The GE digital I/O board DS3800HIOD1G1G is installed in drives that require some specific environmental considerations. The drive must be installed in a cool and clean air supply location. The location must have an adequate power supply. In some environments, installation takes place in a room with other heat-generating equipment. If this is the case, you can reduce the number of drives and other devices in the room to reduce heat. You can also add fans to keep the air flowing around the drive and prevent heat buildup. Use high-powered industrial fans mounted on the wall. Make sure they are in good condition and that enough of them are installed to move the air and reduce heat buildup.

If dust and dirt in the air is a problem, install a cover over the device to suck the dust and dirt away. Pollutants can be discharged from the area to keep the air clean.

GE 数字I/O板 DS3800HIOD1G1G 用于快速安装在驱动器中

主要产品

PLC模块，可编程控制器，CPU模块，IO模块，DO模块，AI模块，DI模块，网通信模块，
以太网模块，运动控制模块，模拟量输入模块，模拟量输出模块，数字输入模块，数字输出
模块，冗余模块，电源模块，继电器输出模块，继电器输入模块，处理器模块


型号推荐

BENTLY 125840-01 3500/15小卡    控制I/O模块
BENTLY 135489-03 3500/42M小卡    数字量输出子模件
BENTLY 135489-01 3500/42M小卡    多功能控制器
BENTLY 330130-045-00-00    数字量输入子模件
BENTLY 3500/25    控制输入输出子模件
BENTLY 149992-01 3500/33小卡    模拟量输入子模件
BENTLY 3500/34    DCS控制器模块
BENTLY 146031-01    模拟量输出子模件
BENTLY 1900/27    隔离模拟信号输入模件
BENTLY 3500/50    变频器触发板
BENTLY 3500/33    I/O扩展接口板
BENTLY 1900/65A    励磁通讯适配器
BENTLY 3500-20-01    通用电气模块
BENTLY 3500-20-01    以太网模块
BENTLY 35001513330001    火检处理器
BENTLY 35001513329201    测量板
BENTLY 3500151276100110    机器人配件
BENTLY 3500151276100100    板卡
BENTLY 35001512761001    开关量输入模块
BENTLY 3500151258400100    功率电源驱动板