GE 通用电气 DS3800HIOA1B1B控制电机的速度 电路板

GE 通用电气 DS3800HIOA1B1B控制电机的速度 电路板

GE 输入隔离器板 DS3800HIOA1B1B 在每个角上都有一个孔，用于用螺钉安装板。GE 输入隔离器板 DS3800HIOA1B1B 还装有微处理器和多个可擦除可编程只读 (EPROM) 模块。该板有 1 个 34 针连接器，可从板的边缘接触到。它还填充有测试点。

带状电缆连接到 34 针连接器。它携带的 34 个独立信号是板发送给其他板进行处理的命令。其他信号由电路板接收。这些信号由电路板处理。带状电缆需要特别考虑，因为它是一种宽电缆，可以阻挡空气穿过驱动器。正确的电缆布线有助于保持气流。沿着驱动器内部的外边缘布置电缆，避免阻挡空气到达组件和其他板。

带状电缆通过电缆末端的连接器连接到板上。它与带状电缆的连接不牢固，很容易从带状电缆中拉出或失去连接。始终使带状电缆保持一定的松弛度，以免拉紧或拉扯电缆。切勿通过拉扯带状电缆来拉出带状电缆。相反，握住连接器并轻轻地将其从连接器上取下。

连接带状电缆和安装电路板时，请保护电路板免受静电积聚。佩戴腕带以保护组件免受损坏。

GE 通用电气 DS3800HIOA1B1B控制电机的速度 电路板

The GE input isolator plate DS3800HIOA1B1B has a hole at each corner for mounting the plate with screws. The GE input isolator board DS3800HIOA1B1B also houses a microprocessor and multiple erasable programmable read-only (EPROM) modules. The board has a 34-pin connector that can be reached from the edge of the board. It is also filled with test points.

The ribbon cable is connected to the 34-pin connector. The 34 individual signals it carries are commands that the board sends to other boards for processing. Other signals are received by the circuit board. These signals are processed by the circuit board. Ribbon cable needs special consideration because it is a wide cable that blocks air from passing through the drive. Proper cabling helps maintain airflow. Lay out cables along the outer edge of the driver's interior to avoid blocking air from reaching components and other plates.

The ribbon cable is connected to the board through a connector at the end of the cable. It is not firmly connected with the ribbon cable, and it is easy to pull out or lose the connection from the ribbon cable. Always keep the ribbon cable to a certain degree of slack, so as not to tighten or pull the cable. Do not pull out a ribbon cable by pulling on it. Instead, hold the connector and gently remove it from the connector.

When connecting ribbon cables and installing circuit boards, protect the circuit boards from static buildup. Wear a wrist strap to protect the components from damage.

GE 通用电气 DS3800HIOA1B1B控制电机的速度 电路板

型号推荐
ABB DCS     LWN1902-6E 贝尔 交流/直流转换器      ABB TK457V050
ABB DCS     LWN1702-6E 贝尔 交流/直流转换器       ABB DSRF197K01
ABB DCS     LWN1801-6E 贝尔 交流/直流转换器 49.4V 250W    3BHE039203R0101
ABB DCS     LWN1902-6EG 贝尔 交流/直流转换器     3BHB004027R0101
ABB DCS     LWN1701-6EG 贝尔 交流/直流转换器 37V 250W     3BHB003154R0101
ABB DCS     LWN1601-6EG 贝尔 交流/直流转换器 24.7V 250W     ABB PM864AK01-EA
ABB DCS     LWN1601-6ER 贝尔 交流/直流转换器      ABB CI868K01-EA
ABB DCS     LWN1801-6EG 贝尔 交流/直流转换器 49.4V 250W    ABB 5SHY35L4520
ABB DCS     LWN1301-6EG 贝尔 交流/直流转换器 12.35V 250W    ABB UNS0119A-P V101
ABB DCS     LWN1601-6EC1 贝尔 导轨式 247W 24.7V    ABB GVC736CE101
ABB DCS     LWN1701-6EM1 贝尔 交流/直流转换器      ABB GFD212A
ABB DCS     LWN1601-6EM2 贝尔 交流/直流转换器    ABB 5SHX1445H0001
ABB DCS     LWN1140-6EM1 贝尔 DIN 导轨 194W 13.8V 电池充电器    ABB PP836
ABB DCS     LWN1740-6EM1 贝尔 DIN 导轨 230W 51.36V 电池充电器    ABB 5SDF0860H0003
ABB DCS     LWN1601-6EK2 贝尔 电源 250W 24V DIN 导轨    ABB 5SDD1060F0001