欢迎光临厦门雄霸电子商务有限公司官网!
工控|工业|自动化进口DCS系统 机器人系统 大型伺服系统
全国咨询热线(Sunny)18059884797
联系我们
厦门雄霸电子商务有限公司
手机:18059884797
QQ:3095989363
邮箱:xiongbagk@gmail.com
地址 :福建省厦门市思明区吕岭路1733号2008单元(万科创想中心)
联系人:Sunny
您的位置: 首页>>产品展示 >
产品展示 》 GE 》 GE DS3800HFPC1L1H 功能处理器板 具有用于连接到驱动器的模块化

GE DS3800HFPC1L1H 功能处理器板 具有用于连接到驱动器的模块化

型号:DS3800HFPC1L1H

GE DS3800HFPC1L1H 功能处理器板 具有用于连接到驱动器的模块化

品牌 GE 加工定制 否 操作温度 (-22°F to +150°F). 湿度 95%, noncondensing. 硬件 RS422接口 指示灯驱动 显示通道(s) 上面的LED处于警戒状态。 储存温度 (-40°F to +185°F). 重量 0.82 kg 通道更新率 1 second, typical 能量功耗 4.6 watts max. 功耗 10.5瓦 通信 USB-B

GE DS3800HFPC1L1H 功能处理器板 具有用于连接到驱动器的模块化

产品描述

GE功能处理器板DS3800HFPC1L1H具有用于连接到驱动器的模块化连接器和固定杆,用于将电路板固定在驱动器中。GE功能处理器板DS3800HFPC1L1H还装有8个跳线和多个电容器。该板还具有 1 个 40 针连接器,可从板的正面访问。它还具有用于连接子卡的支架。

电路板上的另一个组件是晶体管到晶体管逻辑 (TTL) 器件。它用作集成电路之间的接口逻辑。

安装电路板的zui后一步是将带状电缆连接到电路板上的 40 针连接器。当主板安装在机架中时,安装人员可以使用连接器。连接器位于 2 个固定杆之间。它们将电路板固定在机架中,并牢固地连接 2 个模块化连接器。板上嵌入了 1 个模块化连接器。另一个位于板架后部的驱动器内部。当您将电路板插入机架时,2 个模块化连接器相遇并形成连接。当您锁定固定杆时,模块化连接器会牢固就位。

要安装带状电缆,请将塑料连接器固定在末端,并在带状电缆中保持松弛。将其与板上的连接器对齐,然后将其压入连接器。在连接中寻找空间,然后再次将 2 个连接器压在一起。握住塑料连接器将电缆拉出。如果握住带状电缆拉出带状电缆,可能会损坏带状电缆。

GE DS3800HFPC1L1H 功能处理器板 具有用于连接到驱动器的模块化

GE DS3800HFPC1L1H 功能处理器板 具有用于连接到驱动器的模块化

Product description

The GE functional processor board DS3800HFPC1L1H has a modular connector for connection to the driver and a retainer rod for securing the board in the driver. The GE functional processor board DS3800HFPC1L1H also has eight jumpers and multiple capacitors. The board also features a 40-pin connector that can be accessed from the front of the board. It also has a bracket for connecting the daughter card.

Another component on the board is a transistor-to-transistor logic (TTL) device. It serves as the interface logic between integrated circuits.

The final step in installing the board is to connect the ribbon cable to the 40-pin connector on the board. When the motherboard is mounted in the rack, the installer can use connectors. The connector is located between two fixed rods. They secure the board in the rack and securely connect 2 modular connectors. A modular connector is embedded in the board. The other is located inside the drive at the rear of the frame. When you insert the board into the rack, 2 modular connectors meet and form a connection. When you lock the retaining rod, the modular connector is firmly in place.

To install the ribbon cable, secure the plastic connector at the end and keep it loose in the ribbon cable. Align it with the connector on the board and press it into the connector. Look for space in the connection and press the 2 connectors together again. Hold the plastic connector and pull the cable out. If you hold the cable and pull it out, the cable may be damaged.

GE DS3800HFPC1L1H 功能处理器板 具有用于连接到驱动器的模块化

GE DS3800HFPC1L1H 功能处理器板 具有用于连接到驱动器的模块化

型号推荐
ABB DCS     LWN1902-6E 贝尔 交流/直流转换器      ABB TK457V050
ABB DCS     LWN1702-6E 贝尔 交流/直流转换器       ABB DSRF197K01
ABB DCS     LWN1801-6E 贝尔 交流/直流转换器 49.4V 250W    3BHE039203R0101
ABB DCS     LWN1902-6EG 贝尔 交流/直流转换器     3BHB004027R0101
ABB DCS     LWN1701-6EG 贝尔 交流/直流转换器 37V 250W     3BHB003154R0101
ABB DCS     LWN1601-6EG 贝尔 交流/直流转换器 24.7V 250W     ABB PM864AK01-EA
ABB DCS     LWN1601-6ER 贝尔 交流/直流转换器      ABB CI868K01-EA
ABB DCS     LWN1801-6EG 贝尔 交流/直流转换器 49.4V 250W    ABB 5SHY35L4520
ABB DCS     LWN1301-6EG 贝尔 交流/直流转换器 12.35V 250W    ABB UNS0119A-P V101
ABB DCS     LWN1601-6EC1 贝尔 导轨式 247W 24.7V    ABB GVC736CE101
ABB DCS     LWN1701-6EM1 贝尔 交流/直流转换器      ABB GFD212A
ABB DCS     LWN1601-6EM2 贝尔 交流/直流转换器    ABB 5SHX1445H0001
ABB DCS     LWN1140-6EM1 贝尔 DIN 导轨 194W 13.8V 电池充电器    ABB PP836
ABB DCS     LWN1740-6EM1 贝尔 DIN 导轨 230W 51.36V 电池充电器    ABB 5SDF0860H0003
ABB DCS     LWN1601-6EK2 贝尔 电源 250W 24V DIN 导轨    ABB 5SDD1060F0001
GE DS3800HFPC1L1H 功能处理器板 具有用于连接到驱动器的模块化

在线客服
联系方式

热线电话

18059884797

邮箱

xiongbagk@gmail.com

上班时间

周一到周五

微信
WhatsApp
线