5SHX1060H0003 ABB 高压模块 IGCT可控硅

5SHX1060H0003 ABB 高压模块 IGCT可控硅

5SHX1060H0003可控硅高压卡件VMIVME-7700具有板载BIOS设置程序，可控制许多配置选项。这些选项保存在一个特殊的非易失性文件中，电池支持的存储芯片，统称为电路板的CMOS配置”。

CMOS配置控制有关从应用电源的那一刻起，硬件的行为。VMIVME-7700出厂时带有硬盘驱动器类型配置集CMOS中的自动。VMIVME-7700 BIOS设置程序的详细信息包含在附录C中。VMIVME7700提供前面板访问PMC扩展站点VGA连接器，两个10/100以太网连接器，手动复位开关，COM 1和2，双USB和状态指示灯。

VMIVME-7700前面板的图纸如图所示图1-4中所示。前面板连接器和指示灯的标签如下：LAN 1 10/100 Mbit以太网连接器LAN 2 10/100 Mbit以太网连接器SVGA SVGA视频接口RST手动复位开关COM 1:2两个Micro DB9串行连接器（COM 1和2）M/K双鼠标/键盘连接器USB两个单独的USB接口RPIB状态指示灯

5SHX1060H0003 ABB 高压模块 IGCT可控硅

The 5SHX1060H0003 thyristor high voltage card VMIVME-7700 has an onboard BIOS setup program to control many configuration options. These options are saved in a special non-volatile file of the battery-supported memory chip, collectively known as the CMOS configuration of the circuit board."

CMOS configuration controls the behavior of the hardware from the moment the power supply is applied. The VMIVME-7700 comes out of the factory with hard drive type configuration set Automatic in CMOS. Details of the VMIVME-7700 BIOS setup program are included in Appendix C. The VMIVME7700 offers front panel access to the PMC expansion site with VGA connectors, two 10/100 Ethernet connectors, manual reset switches, COM 1 and 2, dual USB and status indicators.

Figure 1-4 shows the front panel of the VMIVME-7700. Front panel connectors and indicators are labeled as follows: LAN 1 10/100 Mbit Ethernet connector LAN 2 10/100 Mbit Ethernet connector SVGA SVGA Video interface RST Manual reset switch COM 1:2 Two Micro DB9 serial connectors (COM 1 and 2) M/K dual mouse/keyboard connector USB Two separate USB port RPIB status indicators

5SHX1060H0003 ABB 高压模块 IGCT可控硅
型号推荐