IC698CPE030 GE 具有两 2个以太网通信端口

IC698CPE030 GE 具有两 2个以太网通信端口

该IC698CPE030是可编程自动化控制器 （PAC） 的 PACSystem RX7i 中zui先进的中央处理器 （CPU） 之一。该 CPU 旨在满足行业的现代自动化、连接和集成要求。它以前由 GE 智能平台 （GE IP） 制造，但随着zui近被艾默生自动化收购，PACSystem RX7i 现在是后者的一部分。

IC698CPE030 处理器安装有计算机级微处理器，即 600MHz Pentium-M 微处理器，具有 64 MB 用户内存和 64 MB 用户闪存。它的布尔执行速度为每 0 个布尔触点/线圈 069.1000ms。该 CPU zui多可容纳 32 K 位的离散 I/O 和 32 K 字的模拟 I/O，zui多可将 512 个程序块下载到该 CPU，其中每个程序块zui多可以有 128 KB 的内存。

该IC698CPE030还具有两 （2） 个以太网通信端口，能够自动感应网络传输速度，并可配置为半双工和全双工操作模式。内置的 Web 服务器和文件传输协议 （FTP） 功能可通过这些以太网端口访问，允许用户远程监控和配置处理器。除了内置以太网端口外，

该 CPU 还具有一 （1） 个 RS232 端口;一 （1） 个 RS485 端口和一 （1） 个站点管理器端口。这些通信接口支持SRTP、Modbus TCP服务器和客户端、用于基于以太网的通信的以太网全局数据（EGD）和用于串行通信的Modbus RTU从站、SNP、串行I/O。 

IC698CPE030 GE 具有两 2个以太网通信端口

The IC698CPE030 is one of the most advanced central processing units (cpus) in the Programmable Automation Controller (PAC) PACSystem RX7i. The CPU is designed to meet the modern automation, connectivity and integration requirements of the industry. It was previously manufactured by GE Intelligent Platforms (GE IP), but with its recent acquisition by Emerson Automation, PACSystem RX7i is now part of the latter.

The IC698CPE030 processor is equipped with a computer-grade microprocessor, namely a 600MHz Pentium-M microprocessor, with 64 MB of user memory and 64 MB of user flash memory. It has a Boolean execution speed of 069.1000ms per 0 Boolean contacts/coils. The CPU can hold up to 32K bits of discrete I/O and 32K words of analog I/O, and up to 512 program blocks can be downloaded to the CPU, where each block can have up to 128 KB of memory.

The IC698CPE030 also features two (2) Ethernet communication ports that automatically sense network transmission speeds and can be configured for both half-duplex and full-duplex operating modes. The built-in Web server and File Transfer Protocol (FTP) capabilities are accessible through these Ethernet ports, allowing users to remotely monitor and configure the processor. In addition to a built-in Ethernet port,

The CPU also has one (1) RS232 port; One (1) RS485 port and one (1) site Manager port. These communication interfaces support SRTP, Modbus TCP servers and clients, Ethernet Global Data (EGD) for Ethernet-based communications, and Modbus RTU slave stations, SNPS, and serial I/O for serial communications.

IC698CPE030 GE 具有两 2个以太网通信端口