VME7740-841 GE 控制模块 可以实时监测设备的状态

VME7740-841 GE 控制模块 可以实时监测设备的状态

VMIVME-7740处理器模块是一个完整的基于奔腾III处理器的计算机，具有单欧洲卡结构的额外优势，并与VMEbus规范Rev. C.1完全兼容。VMIVME-7740具有高 级VMEbus接口和双端口至VMEbus的RAM，是多处理器应用的理想选择。

单CPU板作为标准PC/AT运行，执行PC/AT类型的加电自检，然后启动MS-DOS、Windows 95、Windows NT或任何其它PC兼容的操作系统。

VMIVME-7740也作为VMEbus控制器运行，并通过板载PCI-to-VMEbus桥和Endian转换硬件与其他VMEbus模块交互。

VMIVME-7740可作为VMEbus从板使用。根据本卷和/或专用于可选PCI-VMEbus接口板的第二卷《基于VMIVME-7740 Tundra Universe II的VMEbus接口产品手册》(文件编号500-007740-001)中定义的参考资料，通过对VMI VME-7740s PCI-v mebus桥进行编程，可实现v mebus功能。

VMIVME-7740编程器只需链接到VMEbus中断和控制函数库，即可快速、轻松地控制所有VMEbus功能。该库随VMICs VMISFT-9420 IOWorks Access软件提供给Windows NT用户。

VME7740-841 GE 控制模块 可以实时监测设备的状态

The VMIVME-7740 processor module is a complete Pentium III processor-based computer with the added benefit of a single European card architecture and full compatibility with the VMEbus specification Rev.C.1. The VMIVME-7740 features an advanced VMEbus interface and dual-port to VMEbus RAM, making it ideal for multiprocessor applications.

The single CPU board runs as a standard PC/AT, performs a PC/AT type power-on self-test, and then boots MS-DOS, Windows 95, Windows NT, or any other PC-compatible operating system.

The VMIVME-7740 also operates as a VMEbus controller and interacts with other VMEbus modules via the onboard PCI-to-VMEbus bridge and Endian conversion hardware.

The VMIVME-7740 can be used as a VMEbus slave board. Based on the references defined in this volume and/or Volume II, VMEbus Interface Product Manual Based on VMIVME-7740 Tundra Universe II, dedicated to Optional PCI-VMEbus interface boards (file No. 500-007740-001), By programming the VMI VME-7740s PCI-v mebus bridge, the vmebus function can be realized.

The VMIVME-7740 programmer can quickly and easily control all VMEbus functions by simply linking to the VMEbus Interrupt and control library. The library is available to Windows NT users with the VMICs VMISFT-9420 IOWorks Access software.

VME7740-841 GE 控制模块 可以实时监测设备的状态