ABB 216DB61 数字量控制模块 用于监测和控制数字信号

ABB 216DB61 数字量控制模块 用于监测和控制数字信号

产品介绍：

216DB61简单易用

● 110/220/400/575/690VAC 全球电源标准

● 无速度传感器矢量控制技术

● 结构紧凑致密，高强度模压塑料板材工艺

● 双功率配置，满足重载及风机、泵应用

● 静态自整定

● 十个参数设置，满足90% 的应用

● 智能热管理

● 输出频率可达1500Hz

作用火灾报警时，报警控制器通过输出模块启动需要联动的外控设备,如防排烟阀、送风阀、防火卷帘门、风机、警铃  等，并可接受设备的动作回答。  输出模块连接在控制器的回路总线上，可以安装在所控设备的附近，也可安装在楼层端子模块箱内。采用电子写码，可  以现场编码。输出模块的输出控制逻缉可以根据工程情况编程完成。当控制器接收到探测器的报警信号后,根据预先  编入的程序,控制器通过总线将联动控制信号输送到输出模块，输出模块启动需要联动的消防设备;设备动作后会接  受一个信号回答。
 

ABB 216DB61 数字量控制模块 用于监测和控制数字信号
Product Introduction:

The 216DB61 is easy to use

● 110/220/400/575/690VAC global power supply standard

● Speed sensorless vector control technology

● Compact and dense structure, high strength molded plastic sheet technology

● Dual power configuration to meet heavy duty and fan, pump applications

● Static self-tuning

● Ten parameter Settings to meet 90% of applications

● Intelligent thermal management

● Output frequency up to 1500Hz

When the fire alarm occurs, the alarm controller starts the external control equipment that needs to be linked through the output module, such as smoke exhaust valve, air supply valve, fire shutter door, fan, alarm bell, etc., and can accept the action of the equipment. The output module is connected to the loop bus of the controller and can be installed near the control device or in the floor terminal module box. Using electronic coding, can be coded in the field. The output control logic of the output module can be programmed according to the project situation. When the controller receives the alarm signal of the detector, according to the pre-programmed program, the controller transmits the linkage control signal to the output module through the bus, and the output module starts the fire fighting equipment that needs linkage; The device will receive a signal response after the action.

ABB 216DB61 数字量控制模块 用于监测和控制数字信号