8810-HI-TX-01 GE 8通道模拟输入

8810-HI-TX-01 GE 8通道模拟输入

特征

●PAC8000 I/O是完全模块化的/O解决方案,适用于通用和危险区域应用。它提供各种I/O功能，并具有开放式架构,通过选择适当类型的总线接

口模块(IM)或控制器，允许与各种不同的现场总线进行通信。

●现场端子(每个/O模块个创)卡在载体 上,无需额外的端子或连接即可接受现场接线。如果在现场损坏，可以很容易地更换它们。全面的机械键控

系统确保了设备的安全性。

●载体通过安装在平板或T或G截面DIN导轨上形成PAC8000s的物理和电注干。它们支持并互连BIM或控制器、电源/O模块和现场终端，并承

载内部轨道总线的地址、数据和电源线

●2线、3线或4线变送器

●HART传递、 采集和状态报告

●8914-PSAC需要24 VDC总线现场电源 

8810-HI-TX-01 GE 8通道模拟输入

trait

The PAC8000 I/O is a fully modular /O solution for general purpose and hazardous area applications. It offers a variety of I/O functions and has an open architecture, by selecting the appropriate type of bus connection

Port modules (IM) or controllers that allow communication with a variety of different fieldbuses.

● Field terminals (one for each /O module) are stuck to the carrier and can accept field wiring without additional terminals or connections. If damaged in the field, they can be easily replaced. Full mechanical keying

The system ensures the safety of the equipment.

● The carrier is physically and electrically drained to form PAC8000s by mounting on a flat plate or T or G section DIN rail. They support and interconnect BIM or controllers, power /O modules, and field terminals

Carry the address, data and power cord of the internal track bus

● 2-wire, 3-wire or 4-wire transmitters

●HART transfer, acquisition and status reporting

●8914-PSAC requires 24 VDC bus field power supply

8810-HI-TX-01 GE 8通道模拟输入