BENTELY 140734-01 检测器模块 四通道显示器

BENTELY 140734-01 检测器模块 四通道显示器

3500/40M Proximitor Monitor的主要用途是提供以下资料:通过连续比较进行机械保护根据已配置告警监控参数设置驱动告警l操作和操作的基本机器信息维修人员每个通道，通常取决于配詈调节其输入信号以产生各种参数称为静态值。您可以配置的警报设定值每个活动静态值和危险设定值为任意两个活动静态值。

3500/40M模块要求如下(或固件和软件修订:软件版本-2.503500/02软件版本- 2.203500/03软件-版本1.21当订购l/O模块与外部终止外部终止块电缆必须分别订购l/O模块。

3500系统是-个应用的微处理器技术设计的,功能的监测系统除了满足上述需要之外，3500系统增加了以下方面的优点:
-增强了操作人员信息
-增加了与工厂控制计算机的集成度
-减少了安装和维修费用
-提高了可靠性
-增强的操作人员信息

BENTELY 140734-01 检测器模块 四通道显示器

The main purpose of the 3500/40M Proximitor Monitor is to provide the following data: Mechanical protection by continuous comparison according to the configured alarm monitoring parameters set to drive the alarm l operation and the basic machine information for the operation of the maintenance personnel per channel, usually depending on the match to adjust its input signal to produce various parameters called static values. You can configure the alarm setpoint for each activity static value and the danger setpoint to any two activity static values.

The requirements for the 3500/40M module are as follows (or firmware and software revisions: Software version -2.503500/02 Software version - 2.203500/03 Software - Version 1.21 When ordering the l/O module and external termination The external termination block cable must be ordered separately.


The 3500 system is an application of microprocessor technology design, the function of the monitoring system in addition to meeting the above needs, the 3500 system adds the following advantages:
- Enhanced operator information
- Increased integration with plant control computers
- Reduced installation and maintenance costs
- Improved reliability
- Enhanced operator information

BENTELY 140734-01 检测器模块 四通道显示器