3500/50-01-00-01 汽轮机转速和反转测量模块

3500/50-01-00-01 汽轮机转速和反转测量模块

本特利电源模块3500/15-05-05-00电源可订购-交流/直流输入电源，提供范围内的电压源的兼容性。线噪声滤波器是标准的，3500机架可以从
单—电源供
电，或双电源供应器可以提供冗余的情况下，不能容忍电源中断。双用品驻留在左大部分机架槽的上部和下部位置。冗余电源可以使用单独的电!
源。例如，基
层(底)提供可操作的120伏电源而备份(上)可以提供不间断的24伏直流电源供电。每个电源可以单独提供电源的整个机架及其模块。当使用)
徐余电源时，一
个电源作为主电源，而另一个作为备份，准备立即和自动操作作为主机架供应，而不中断机架功能，应主要供应。3500/15电源模块具有自我监督的功能，允许它确定其输出电压在标准范围内。该模块通过一个绿色表明即将到来的“供给好”的LED电源的前面板。本特利电源模块3500/15-05-05-00新品
3500/42M位移/速度加速度监测器是一个4通道监测器，它可以接受1到4个来自位移、速度、速度或加速度传感器的信号，通过对这些信号的处理，它可以完成各种不同的振动和位置测量，并将处理的信号与用户编程的报警值进行比较。3500/42M的每个通道均可以使用3500框架组态软件进行编程，完成下列各种功能:三重冗余三个总线型TMRI/O通道并联到径向振动（TMR)一个传感器上的有效阻抗为50千轴向位移ⅡV/O:欧差胀偏心功率:正常消耗为7.7瓦加速度速度轴振动圆形可接受区
本特利键相器模块3500/25-01-01-003500/25改进的键相器模块是一个半高度,2通道模块，用来为3500框架中的监视器模块提供健相位信号。
本特利键相器
模块3500/25-01-01-00此模块接收来自电涡流传感器或电磁式传感器的输入信号，并转换此信号为数宇键相位信号，该数宇信号可指示何时转轴上的键相位标记通过键相位。本特利键相器模块3500/25-01-01-003500机械保护系统可接收4个键相位信号。

3500/50-01-00-01 汽轮机转速和反转测量模块

Bentley Power Module 3500/15-05-05-00 Power Supply available for ordering - AC/DC input power supply that provides compatibility across a range of voltage sources. Line noise filters are standard and 3500 racks can be taken from
Single - power supply
Electrical, or dual power supplies can provide redundancy in cases where power outages cannot be tolerated. Dual supplies reside in the upper and lower positions of most of the left rack slots. Redundant power supply can use separate electricity!
The source. For example, basis
The layer (bottom) provides an operable 120 volt power supply while the backup (top) can provide uninterrupted 24 volt DC power supply. Each power supply can individually supply the entire rack of power and its modules. When used)
Xu residual power supply when one
One power supply acts as the main power supply, while the other acts as a backup, ready for immediate and automatic operation as the host frame supply, without interrupting the rack function, should be the main supply. The 3500/15 power supply module has a self-monitoring function that allows it to determine that its output voltage is within the standard range. The module uses a green color to indicate the upcoming "good supply" of LED power on the front panel. Bentley Power module 3500/15-05-05-00 New
The 3500/42M displacement/Velocity acceleration monitor is a 4-channel monitor, which can accept 1 to 4 signals from displacement, speed, speed or acceleration sensors, by processing these signals, it can complete a variety of different vibration and position measurements, and compare the processed signals with the user programmed alarm values. Each channel of 3500/42M can be programmed using the 3500 framework configuration software, The following functions are accomplished: triple redundancy three bus TMRI/O channels in parallel to a radial vibration (TMR) sensor with an effective impedance of 50 kN axial displacement II V/O: differential expansion eccentric power: normal consumption of 7.7 watts Acceleration velocity axis vibration circular acceptable zone
Bentley Phaser module 3500/25-01-01/003500/25 The improved phaser module is a half-height, 2-channel module designed to provide a healthy phase signal to the monitor module in the 3500 frame.
Bentley bond phaser
Module 3500/25-01-01-00 This module receives an input signal from an eddy current sensor or an electromagnetic sensor and converts this signal to a digital key phase signal that indicates when the key phase marker on the rotating shaft passes through the key phase. Bentley Phaser Module 3500/25-01-01-003500 Mechanical protection system can receive 4 key phase signals.

3500/50-01-00-01 汽轮机转速和反转测量模块