DS200LDCCH1ANA 驱动控制/LAN通信板 I/O功能

DS200LDCCH1ANA 驱动控制/LAN通信板 I/O功能

产品描述
GE驱动控制/LAN通信板DS200LDCCH1ANA具有多个微处理器，可控制驱动器、电机和I/O功能。它还提供对 LAN 网络的控制。GE驱动控制/LAN通信板DS200LDCCH1ANA装有四个微处理器，每个微处理器被分配一个单独的功能。一个微处理器提供驱动控制处理。一个微处理器提供电机控制处理。一个微处理器提供协电机处理。一个微处理器提供LAN控制处理。

如果主板运行不正常或似乎提供的性能不佳，您可能需要对主板执行软重置。硬复位是指电源中断，电路板必须重新启动。如果可能，应避免这种情况，并且仅当驱动器发生故障或发生导致驱动器意外关闭的跳闸情况时才应发生这种情况。例如，如果发生过载情况，驱动器将自动关闭以保护组件和电机。

重新启动电路板的更好选择是软复位。这是当电路板中仍然存在电源并用于清除故障时。执行复位的一种方法是按下板上的复位按钮。只有合格的人员才能这样做，因为驱动器中有电源，并且存在触电或烧伤的风险。它要求维修人员将手伸入板柜并按下重置按钮。按住按钮约 5 秒钟，然后松开按钮。

DS200LDCCH1ANA 驱动控制/LAN通信板 I/O功能

Product description
The GE Drive Control /LAN communication board DS200LDCCH1ANA features multiple microprocessors to control the drive, motor, and I/O functions. It also provides control over the LAN network. The GE Drive control /LAN communication board DS200LDCCH1ANA is equipped with four microprocessors, each of which is assigned a separate function. A microprocessor provides drive control processing. A microprocessor provides motor control processing. A microprocessor provides comotor processing. A microprocessor provides LAN control processing.

If the motherboard is not functioning properly or seems to be providing poor performance, you may need to perform a soft reset on the motherboard. A hard reset means that the power supply is interrupted and the board must be restarted. This should be avoided if possible, and should only occur if the drive fails or a trip condition occurs that causes the drive to unexpectedly shut down. For example, if an overload situation occurs, the drive will automatically shut down to protect the components and motor.

A better option for restarting the board is a soft reset. This is when power is still present in the board and used to clean up the fault. One way to perform a reset is to press the reset button on the board. Only qualified personnel should do this because there is a power supply in the drive and there is a risk of electric shock or burns. It requires the maintenance person to reach into the board cabinet and press the reset button. Hold the button for about 5 seconds, then release the button.

DS200LDCCH1ANA 驱动控制/LAN通信板 I/O功能