990050-01-00 机械振动监测备件

990050-01-00 机械振动监测备件

本特利变送器990-05-XX-01-00为美国本特利(bently)振动监测产品，通过欧洲的CE标志认证，灵敏度7.87mV/μm，线性范围2mm，满量程为125μm，用于测量机器的轴或其他部件相对于bently电涡流传感器探头 位置的径向振动。变送器提供与靶和探头 之间距离成比例的电压。适用机器:风机、往复式压缩机、电动机、水泵、风扇、鼓风机、离心机、发电机等， 应用于钢铁、电力、冶金、化工、石化、机械等企业。

bently990系列前置变送器包含三个部件：3300XL探头、延长电缆、变送器。提供两种类型的输出信号4至20mA电流环路和电压信号。本特利变送器990-05-XX-01-00为环路供电设备，可接受来自bently3300XL或3300XL传感器及其匹配的延长电缆信号，将振动信号调整为相应的振动峰值单按照比例变送成4至20mA信号，提供给设备的控制系统PLC或DCS，以便机组的保护、报警和逻辑控制。常用匹配探头和电缆：330103-00-15-10-02-00，330130-040-00-00等。校验设备用万用表和TK-3E校验仪。

990050-01-00 机械振动监测备件

Bentley transmitter 990-05-XX-01-00 is a vibration monitoring product from bently, which has passed the CE mark certification of Europe, with a sensitivity of 7.87mV/μm, a linear range of 2mm, and a full scale of 125μm. It is used to measure the radial vibration of the shaft or other parts of the machine relative to the probe position of the bently eddy current sensor. The transmitter provides a voltage proportional to the distance between the target and the probe. Applicable machine: fan, reciprocating compressor, motor, pump, fan, blower, centrifuge, generator, etc., used in steel, electric power, metallurgy, chemical, petrochemical, machinery and other enterprises.

The bently990 series front transmitter consists of three components: 3300XL probe, extension cable, and transmitter. Two types of output signals are available from 4 to 20mA current loop and voltage signal. Bentley transmitter 990-05-XX-01-00 is a loop powered device that accepts the signal from Bentley 3300XL or 3300XL sensor and its matching extension cable, adjusts the vibration signal to the corresponding vibration peak and sends the signal proportionally to 4 to 20mA for the device's control system PLC or DCS. For unit protection, alarm and logic control. Commonly used matching probes and cables: 330103-00-15-10-02-00, 330130-040-00-00, etc. Multimeter and TK-3E calibrator for calibration equipment.

990050-01-00 机械振动监测备件