177230-01-01-05 一体式振动传感器探头

177230-01-01-05 一体式振动传感器探头

177230-01-01-05(CN)本特利（bently）一体化振动变送器传感器用于汽轮机、电机、鼓风机、压缩机、空分机、齿轮箱、水泵等大型旋转机械轴的振动， 应用于电力、石油、化工、冶金等行业。

177230-01-01-05(CN)本特利一体化振动变送器传感器的特征包括：通过接口与PLC 和控制系统（DCS 和SCADA）连接；

与PLC 或控制系统输入的常见接口连接。通过熟悉的曲线界面，可快速操作和维护。

无需现场组态或调整；整套系统很少需要额外的部件；包括客户监测其设备的技术支持；包括自检；内置保护接口；支持多种接口电缆；提供 和可重复的数据,简单的数据格式；提供原始振动信号，以便分析、验证。内置值得依赖的强大的CM设计实现行业标准4-20mA环路供电转换器

灵敏度-:主回路（信号一）0.0到25.4mm/s(0到1.0in/s)±10%，通频有效值(均方根)

直径:25.4mm(1.00in)

高度:66.0mm(2.60in)

壳体材料:304L不锈钢

接头:3-针MIL-C-5015，不锈钢

机体内的安装孔1/4-28 UNF

177230-01-01-05 一体式振动传感器探头

177230-01-01-05(CN) bently integrated vibration transmitter sensor is used for turbine, motor, blower, compressor, air engine, gear box, water pump and other large rotating mechanical shaft vibration, used in electric power, petroleum, chemical industry, metallurgy and other industries.

177230-01-01-05(CN) Features of Bentley Integrated vibration transmitter sensors include: connection to PLC and control systems (DCS and SCADA) through an interface;

Common interface to PLC or control system input. Fast operation and maintenance through the familiar curved interface.

No on-site configuration or adjustment required; The entire system requires few additional components; Including technical support for customers to monitor their equipment; Including self-test; Built-in protection interface; Support a variety of interface cables; Provide and repeatable data in a simple data format; Provide raw vibration signals for analysis and verification. The built-in, reliable and powerful CM design implements industry standard 4-20mA loop power converters

Sensitivity -: Main loop (Signal one) 0.0 to 25.4mm/s(0 to 1.0in/s)±10%, RMS (root mean square)

Diameter :25.4mm(1.00in)

Height :66.0mm(2.60in)

Shell material :304L stainless steel

Joint: 3-pin MIL-C-5015, stainless steel

Mounting holes in the body 1/4-28 UNF

177230-01-01-05 一体式振动传感器探头