8V1045.00-2 是一款交流伺服驱动器

8V1045.00-2 是一款交流伺服驱动器

B &R 8V1045.001-2是一款交流伺服驱动器。它专为工业电机控制应用而设计。该电机是ACOPO…
在运行期间，8V1045.001-2驱动器以热量形式散发 180 瓦。允许的安装方向包括垂直悬挂和水平悬挂（面朝上）。标称安装标高为 0 至 500 米。zui大安装海拔为2000米。驱动器外壳的防护等级为IP20。标称工作温度范围为0 到 40 摄氏度。zui高工作温度为 55 摄氏度。储存温度范围为-25至5…
B &R 8V1045.00-2是一款ACOPOS 伺服驱动器。该驱动器设计用于电压范围为400 至 480 伏交 …
没有制动电阻的zui大设备功率下的zui大功率损耗为 180 瓦。如果温度和安装高度超过建议的限制，输出电流会降低。从海拔 500 米开始，输出电流每 1000 米减少 0.44 安培。8V1045.00-2 支持的开关频率为 5 / 10 / 20 kHz。

8V1045.00-2 是一款交流伺服驱动器

The B&R 8V1045.001-2 is an AC servo drive. It is designed for industrial motor control applications. The motor is ACOPO...
During operation, the 8V1045.001-2 drive emits 180 watts in the form of heat. Allowable mounting directions include vertical suspension and horizontal suspension (face up). Nominal installation elevation is 0 to 500 meters. The maximum installation elevation is 2000 meters. The drive housing is IP20 protected. Nominal operating temperature range is 0 to 40 degrees Celsius. The maximum operating temperature is 55 degrees Celsius. Storage temperature range -25 to 5...
The B&R 8V1045.00-2 is an ACOPOS servo drive. The driver is designed for use in a voltage range of 400 to 480 volts.
The maximum power loss at maximum equipment power without brake resistance is 180 watts. If the temperature and installation height exceed the recommended limits, the output current will decrease. Starting at 500 meters above sea level, the output current is reduced by 0.44 amps per 1000 meters. The 8V1045.00-2 supports a switching frequency of 5/10/20 kHz.

8V1045.00-2 是一款交流伺服驱动器