22F-D4P2N103 具有 380-480VAC 的 3 相输入电压范围

22F-D4P2N103 具有 380-480VAC 的 3 相输入电压范围

Allen-Bradley 22F-D4P2N103 是一款 PowerFlex 可调交流变频器。该变频器是 PowerFlex 4M 产品系列的一部分。该驱动器主要具有 380-480VAC 的三相输入电压范围，并提供 0-460VAC 的三相输出电压范围，适用电机电流为 4.2 A，功率为 1.5 kW （2.0 HP）。

22F-D4P2N103还带有一个集成的RS485通信端口，支持菊花链拓扑结构，其中多达31个驱动器或兼容设备可以连接到该网络拓扑结构，并由网络上的单个主设备进行通信。

22F-D4P2N103 还带有嵌入式 I/O 通道，例如五 （5） 个离散输入通道。通道专用于停止信号，通道 2 用于启动/运行前轮驱动信号参考，而通道 3 用于方向/运行转速输入信号。通道 4 和 5 是完全可编程的输入，具有灵活性。它还配有一 （1） 个 C 型继电器，可配置为指示电机的运行反馈状态。它还具有一 （1） 个模拟输入通道，可配置为 0-10VDC;和0-20mA模拟输入信号。

22F-D4P2N103 需要安装分支电路保护组件。Allen-Bradley 建议使用 10 安培保险丝、140M-C2E-C10 电机保护器和 100-C09 接触器来完成分支保护电路。

22F-D4P2N103 PowerFlex4M 变频器在 50-60 Hz 的 3 相 480V 交流输入电压下运行。额定功率为 4.2 A、1.5 kW 和 2.0 HP。它具有带面板安装的框架尺寸 B 和 DIN 导轨安装选项，可与 IP20 开放式外壳一起安装，可防止zui大 12 毫米的灰尘颗粒。22F-D4P2N103 有一个固定的数字键盘，带有控制和编程键，便于操作。其直观的 4 位 LED 显示屏有 10 个附加指示灯，用于显示驱动器状态信息。RS-485 通信端口用于从计算机编程和多点网络配置。22F-D4P2N103驱动器具有 V/Hz 控制并提供滑移补偿。它通过其零堆叠功能有助于节省足够的面板空间。继电器预充电和可设置的 DIP 开关等功能限制了浪涌电流，并提供了控制接线的灵活性。它还具有驱动过载保护和斜坡调节功能。22F-D4P2N103 变频器使用 Logix 控制平台来简化参数和标签编程，从而缩短开发时间。

22F-D4P2N103 具有 380-480VAC 的 3 相输入电压范围

The Allen-Bradley 22F-D4P2N103 is a PowerFlex adjustable AC frequency converter. The inverter is part of the PowerFlex 4M product family. The driver primarily has A three-phase input voltage range of 380-480VAC, and offers a three-phase output voltage range of 0-460VAC, suitable for motor current of 4.2 A and power of 1.5 kW (2.0 HP).

The 22F-D4P2N103 also comes with an integrated RS485 communication port that supports a Daisy chain topology where up to 31 drivers or compatible devices can connect to this network topology and communicate by a single master device on the network.

The 22F-D4P2N103 also comes with embedded I/O channels, such as five (5) discrete input channels. Channel 2 is used for start/run front wheel drive signal reference, while channel 3 is used for direction/run speed input signals. Channels 4 and 5 are fully programmable inputs with flexibility. It is also equipped with one (1) Type C relay that can be configured to indicate the operating feedback status of the motor. It also has one (1) analog input channel that can be configured from 0-10VDC; And 0-20mA analog input signal.

22F-D4P2N103 requires a branch circuit protection component. Allen-Bradley recommends 10 amp fuses, 140M-C2E-C10 motor protectors, and 100-C09 contactors to complete the branch protection circuit.

The 22F-D4P2N103 PowerFlex4M inverter operates at a 3-phase 480V AC input voltage of 50-60 Hz. Power ratings are 4.2A, 1.5kW and 2.0HP. It has a frame size B with panel mount and a DIN rail mount option that can be mounted with an IP20 open housing to protect against dust particles up to 12 mm. The 22F-D4P2N103 has a fixed numeric keypad with control and programming keys for easy operation. Its intuitive 4-digit LED display has 10 additional indicators for driver status information. The RS-485 communication port is used for programming and multipoint networking from the computer. The 22F-D4P2N103 driver has V/Hz control and provides slip compensation. It helps save enough panel space through its zero stack feature. Features such as relay pre-charging and settable DIP switches limit inrush current and provide flexibility to control wiring. It also features drive overload protection and slope regulation. The 22F-D4P2N103 inverter uses the Logix control platform to simplify parameter and label programming, thereby reducing development time.

22F-D4P2N103 具有 380-480VAC 的 3 相输入电压范围