140CRA93101 RIO子站适配器模块

140CRA93101 RIO子站适配器模块

产品描述

施耐德电气Modicon Quantum系列的140CRA93101 RIO子站适配器模块是其备受推崇的绿色优 质产品之一，并且不含汞。它具有27个I/O扩展模块，可灵活适应您的需求。该模块专为极 端条件而设计，可扩大您的覆盖范围。

特征

140CRA93101的几个主要亮点包括单根同轴电缆、300 mA的总线电流和3 W的功耗。该模块还拥有ATEX 2/22区认证，其中包括严格、彻底和详细的测试和检查过程。按照这些程序，像这种具有此认证的产品也会收到一份报告，概述结果并确认其已达到设定标准。

140CRA93101在模块的顶部前面有一个LED功能，就在型号和型号描述的正下方。当模块通过上电诊断时，LED功能将显示绿灯。当模块在RIO网络上通信时，Com Act LED显示绿色。有一个红色故障LED指示无法与一个或多个I/O模块通信。Error A LED显示红色表示通道A上的通信错误。zui后，Fault B LED与Err A一起显示红色，表示节点地址无效。

优点

无论您需要在何种条件下工作，这款RIO子站适配器模块都可以在-13至158华氏度的扩展工作温度下保持稳定。此外，该涂层提供保护和绝缘：

粉尘含量高的环境

化学接触引起的腐蚀

冷凝水滴或湿气

如何使用140CRA93101

远程I/O子站单通道模块140CRA93101用于在安装在同一RIO子站背板上的I/O模块与CPU背板上的RIO头之间传输数据。它通过同轴电缆网络双向传输数据。

这些特性对于在炼油厂、净化厂或可能存在大量卤素（例如氯）的环境中工作的人员特别有用。

140CRA93101 RIO子站适配器模块

Product description

The 140CRA93101 RIO sub-station adapter module from Schneider Electric's Modicon Quantum series is one of its highly regarded green quality products and is free of mercury. With 27 I/O expansion modules, it can be flexibly adapted to your needs. This module is designed for extreme conditions to extend your coverage.

trait

Several key highlights of the 140CRA93101 include a single coaxial cable, 300 mA bus current, and 3 W power consumption. The module also holds ATEX 2/22 Zone certification, which includes a rigorous, thorough and detailed testing and inspection process. Following these procedures, products like this one with this certification will also receive a report outlining the results and confirming that they have met the set standards.

The 140CRA93101 has an LED function on the top front of the module, right below the model number and model description. When the module passes the power-on diagnosis, the LED function will show a green light. When the module communicates on the RIO network, the Com Act LED displays green. There is a red fault LED indicating an inability to communicate with one or more I/O modules. Error A LED Red indicates A communication error on channel A. Finally, the Fault B LED displays red with Err A, indicating that the node address is invalid.

advantage

No matter what conditions you need to work under, this RIO sub-station adapter module is stable at extended operating temperatures from -13 to 158 degrees Fahrenheit. In addition, the coating provides protection and insulation:

High dust content environment

Corrosion due to chemical contact

Condensation or moisture

How to use 140CRA93101

The remote I/O sub-station single-channel module 140CRA93101 transfers data between the I/O module installed on the same sub-station backplane and the RIO header on the CPU backplane. It transmits data bidirectionally over a network of coaxial cables.

These characteristics are particularly useful for those working in oil refineries, purification plants, or environments where there may be large quantities of halogens, such as chlorine.