2098-DSD-HV150-SE Ultra 3000数字伺服驱动器

2098-DSD-HV150-SE Ultra 3000数字伺服驱动器

Allen-Bradley 2098-DSD-HV150-SE属于Ultra 3000数字伺服驱动器，具有集成的SERCOS接口。这种伺服驱动器用于控制电机等执行器的运动和位置，安装在制造业中，大部分时间在装配区域。

要操作2098-DSD-HV150-SE，必须提供3相，230-480VAC有效值的输入电压。在230VAC时可提供7.5 kW输出功率，在460VAC时可提供15.0 kW输出功率，连续输出电流为34 A，间歇输出电流为68 A。

该伺服驱动器的接口安装在模块的前面板上。这些接口包括有源分流电阻套件的直流总线连接，交流输入电源连接，电机电源连接，在单个端子带内，电机电源线屏蔽钳位于驱动器底部，用于固定电缆到位并消除线路噪声，CN3 9针串口连接器，支持RS232 / RS422和RS485通信标准，CN2 15针电机反馈连接器，用于连接电机反馈，和CN1 44针，用于连接输入和输出信号，如8(8)个离散输入，5(5)个离散输出，由1(1)个继电器和4(4)个源输出，2(2)个模拟输入和1(1)个模拟输出通道。

通过驱动器的SERCO接口，可以与安装有1756 SERCOS接口模块的控制器和安装在任何编程工作站PCI卡槽上的SoftLogix SERCOS接口进行通信。

2098-DSD-HV150-SE Ultra 3000数字伺服驱动器

The Allen-Bradley 2098-DSD-HV150-SE belongs to the Ultra 3000 Digital Servo Drive that features an integrated SERCOS interface.  This SERVO drive is used to control motion and position of actuators such as motors, installed in the manufacturing industry, most of the time in the assembly area.

To operate the 2098-DSD-HV150-SE, it must be supplied with an input voltage supply of 3-Phase, 230-480VAC rms.  It is capable of providing output power of 7.5 kW at 230VAC and 15.0 kW at 460VAC with Continuous Output Current 34 A and Intermittent Output Current of 68 A.

Interfaces of this SERVO drive are mounted on the module’s front panel.  These interface include DC Bus Connections for Active Shunt Resistor Kit, AC Input Power Connections, Motor Power Connections, within a single terminal strip, Motor Power Cable Shield Clamp located at the drive’s bottom, used to fix cable in place and eliminate line noise, CN3 9-pin Serial Port Connector that supports RS232 / RS422 and RS485 communication standard, CN2 15-pin Motor Feedback Connector for connecting motor feedback,  and CN1 44-pin for connecting input and output signals such a Eight (8) Discrete Inputs, Five (5) discrete outputs that is comprised of One (1) Relay and Four (4) sourcing outputs, Two (2) analog input and One (1) analog output channels.

Through the SERCO interface of the drive, communication with controllers installed with the 1756 SERCOS interface module and SoftLogix SERCOS interface installed at the PCI card slot of any programming workstation is possible.