2198-D012-ERS4 伺服驱动器是一款双轴逆变器

2198-D012-ERS4 伺服驱动器是一款双轴逆变器

2198-D012-ERS4 驱动器是由 Allen-Bradley 设计和制造的双轴伺服驱动器。它是 Allen-Bradley Kinetix 5700 系列伺服驱动器的成员。2198-D012-ERS4 伺服驱动器可用于包含多个轴的工业系统。它带有 2 个以太网连接器以及 2 个数字输入。

它还具有 2 个电机反馈连接器。2198-D012-ERS4 伺服驱动器的前面板上有几个状态指示灯。这些状态指示灯包括链路速度指示灯、链路活动状态指示灯、网络状态指示灯和模块状态指示灯。这些指示灯是 LED 灯，可以让用户知道 2198-D012-ERS4 伺服驱动器何时正确连接，并在出现问题或连接被切断时提醒他们。

Allen-Bradley 2198-D012-ERS4 Kinetix 5700 双轴伺服驱动器由接地端子保护，并配有 2 个冷却风扇以防止过热。它的zui大额定电流环路为 1000 赫兹，zui大额定速度环路为 400 赫兹。2198-D012-ERS4 伺服驱动器还以 4 kHtz 的额定 PWM 频率运行。其连续 RMS 输出电流额定值为 5 安培，峰值 RMS 输出电流额定值为 12.5 安培。该驱动器可以在 0 到 50 摄氏度或 32 到 122 华氏度的温度下运行，并且可以在 -40 到 70 摄氏度或 -40 到 158 华氏度的温度下储存。2198-D012-ERS4 伺服驱动器在操作和存储中均支持 5% 至 95% 的非冷凝相对湿度水平。

2198-D012-ERS4 伺服驱动器是一款双轴逆变器

The 2198-D012-ERS4 drive is a two-axis servo drive designed and manufactured by Allen-Bradley. It is a member of the Allen-Bradley Kinetix 5700 series of servo drives. The 2198-D012-ERS4 servo drive can be used in industrial systems with multiple axes. It comes with 2 Ethernet connectors and 2 digital inputs.

It also has 2 motor feedback connectors. There are several status indicators on the front panel of the 2198-D012-ERS4 servo drive. These status indicators include link speed indicators, link activity indicators, network status indicators, and module status indicators. These indicators are LED lights that let the user know when the 2198-D012-ERS4 servo drive is properly connected and alert them if there is a problem or the connection is cut.

Allen-Bradley 2198-D012-ERS4 Kinetix 5700 two-axis servo drives are protected by ground terminals and are equipped with 2 cooling fans to prevent overheating. It has a maximum rated current loop of 1000 Hz and a maximum rated speed loop of 400 Hz. The 2198-D012-ERS4 servo drive also operates at a rated PWM frequency of 4 kHtz. It has a continuous RMS output current rating of 5 amps and a peak RMS output current rating of 12.5 amps. The drive can operate at temperatures from 0 to 50 degrees Celsius or 32 to 122 degrees Fahrenheit, and can be stored at temperatures from -40 to 70 degrees Celsius or -40 to 158 degrees Fahrenheit. The 2198-D012-ERS4 servo drive supports 5% to 95% non-condensing relative humidity levels in both operation and storage.