330104-00-06-10-02-00 3300 XL11mm 探头 过程控制领域

330104-00-06-10-02-00 3300 XL11mm 探头 过程控制领域

3300 XL11mm 探头有多种规格的探头座，包括 铠装和非铠装的1/2-20、5/8- 18、     M14×1.5 和M16×1.5 探头螺纹，背面安装的3300 XL 11mm 探头是3/8-24 或M10×1 的标准螺 纹。传感器系统的所有组件都是ClickLoc?镀金铜接头，锁定到适当位置，防止连接松动。TipLoc专 利模具技术保证了探头端部和主体之间的牢固连接。探头电缆使用CableLoc?专 利设计安全地连接到探头端部，能承受330 牛（75 磅）的拉力。

3300 XL 探头和延伸电缆在订货时也可以选择 FluidLoc?电缆，这种电缆可以防止油或其它液体沿电缆内部泄漏到机器外部；选择接头保护器可以在潮湿环境中为接头提

供附加保护，推荐在所有的安装中都选用接头保护器，提高环境适应性。另外，3300 XL11mm 探头还配有标准防松螺母和安全导线孔。

注：

1.  前置器从工厂供货时已经过AISI4140钢校准。也可以按用户的要求对其它端部材料进行校准。

2.  对于每一根3300XL 延伸电缆，也可以选择硅树脂胶带来代替接头保护器，但在探头与延伸电缆的连接暴露在机组油液中的情况下，不推荐使用硅树脂胶带。

330104-00-06-10-02-00 3300 XL11mm 探头 过程控制领域

The 3300 XL11mm probe is available in a variety of probe mounts, including armored and unarmored 1/2-20, 5/8-18, M14×1.5, and M16×1.5 probe threads, and the backmounted 3300 XL11mm probe is standard threaded in 3/8-24 or M10×1. All components of the sensor system are ClickLoc? Gold-plated copper joint, locked in place to prevent loose connections. TipLoc's patented die technology ensures a strong connection between the probe end and the body. Probe cable using CableLoc? The patented design securely attaches to the probe end and can withstand a pull of 330 N (75 lb).

3300 XL probes and extension cables are also available when ordering FluidLoc? Cables, which prevent oil or other liquids from leaking to the outside of the machine along the inside of the cable; Select joint protectors for joint lifting in humid environments

For additional protection, it is recommended to use joint protectors in all installations to improve environmental adaptability. In addition, the 3300 XL11mm probe is equipped with standard lock nuts and safety wire holes.

Note:

1. The preprocessor has been calibrated with AISI4140 steel when supplied from the factory. Other end materials can also be calibrated according to user requirements.

2. For each 3300XL extension cable, silicone tape can also be selected to replace the connector protector, but it is not recommended to use silicone tape in cases where the connection between the probe and the extension cable is exposed to the unit oil.