330730-080-01-CN 3300 XL 11毫米接近传感器系统

330730-080-01-CN 3300 XL 11毫米接近传感器系统

3300 XL 11毫米接近传感器系统包括:
•3300 XL 11毫米探头
•3300 XL 11mm延长电缆
•3300 XL 11毫米Proximitor®传感器
3300 XL 11毫米接近传感器系统具有3.94 V/mm (100 mV/mil)输出，用于流体膜轴承机上的非接触式振动和位移测量。与我们的标准3300 XL 8毫米传感器系统相比，大11毫米尖 端使该传感器系统具有更长的线性范围。它主要用于以下需要较长线性范围的应用:
•轴向(推力)位置测量
•蒸汽轮机坡道差动膨胀测量
•往复式压缩机的杆位或杆降测量
•转速表和零速度测量
•相位参考(Keyphasor®)信号
3300 XL 11毫米Proximitor传感器旨在取代7200系列11毫米和14毫米传感器系统。当从7200系列系统升级到3300 XL 11mm系统时，每个组件都必须更换为3300 XL 11mm组件。此外，监测系统必须更新。如果使用3500监控系统，则需要更新版本的组态软件，其中列出3300 XL 11 mm传感器系统作为兼容选项。现有的3300监控系统可能需要修改。请联系您当地的销售和服务代表寻求帮助。

330730-080-01-CN 3300 XL 11毫米接近传感器系统

The 3300 XL 11mm proximity sensor system includes:
•3300 XL 11mm probe
•3300 XL 11mm extension cable
•3300 XL 11 mm Proximitor® sensor
The 3300 XL 11 mm proximity sensor system has a 3.94 V/mm (100 mV/mil) output for non-contact vibration and displacement measurement on fluid film bearing machines. The large 11mm tip gives this sensor system a longer linear range compared to our standard 3300 XL 8mm sensor system. It is mainly used in the following applications that require a long linear range:
• Axial (thrust) position measurement
• Differential expansion measurement of steam turbine ramp
• Rod position or rod drop measurement for reciprocating compressors
• Tachometer and zero speed measurement
• Phase Reference (Keyphasor®) signal
The 3300 XL 11mm Proximitor sensor is designed to replace the 7200 series 11mm and 14mm sensor systems. When upgrading from a 7200 series system to a 3300 XL 11mm system, each component must be replaced with a 3300 XL 11mm component. In addition, monitoring systems must be updated. If you are using a 3500 monitoring system, you will need a newer version of the configuration software, which lists the 3300 XL 11 mm sensor system as a compatibility option. The existing 3300 monitoring system may need to be modified. Please contact your local sales and service representative for assistance.

330730-080-01-CN 3300 XL 11毫米接近传感器系统