330930-065-00-00 3300 XL NSv接近传感器 抗干扰能力强

330930-065-00-00 3300 XL NSv接近传感器 抗干扰能力强

特点:
用于严格的安装要求
取代3300 RAM传感器系统和3000系列或7000系列190传感器系统
平均比例因子为7.87伏/毫米(200毫伏/密耳)
GE / Bently Nevada 3300 XL NSv接近传感器系统适用于离心式空气压缩机、制冷压缩机、工艺气体压缩机和其他安装要求严格的机器。3300 XL NSv接近传感器系统包括:
3300 NSv探头
3300 NSv延长电缆
3300 XL NSv前置传感器。

3300 XL NSv传感器系统主要用于沉孔、侧视或后视限制限制使用标准Bently Nevada 3300和3300 XL 5和8 mm传感器系统的区域。它也是小目标应用的理想选择，例如测量小于51毫米(2英寸)的轴的径向振动或小于15毫米(0.6英寸)的平面目标的轴向位置。它主要用于流体膜轴承机器的以下应用中，其中存在小轴或缩小的侧视图:
径向振动和径向位置测量
轴向(推力)位置测量
转速表和零速测量
相位参考(Keyphasor)信号。

330930-065-00-00 3300 XL NSv接近传感器 抗干扰能力强

Features:
For stringent installation requirements
Replaces 3300 RAM sensor systems and 3000 Series or 7000 Series 190 sensor systems
The average scale factor is 7.87 volts/mm (200 millivolts/mil)
The GE/Bently Nevada 3300 XL NSv proximity sensor system is suitable for centrifugal air compressors, refrigeration compressors, process gas compressors and other machines with demanding installation requirements. The 3300 XL NSv proximity Sensor system includes:
3300 NSv probe
3300 NSv extension cable
3300 XL NSv front sensor.

The 3300 XL NSv sensor system is primarily used in areas where countersunk, side-view or rear-view restrictions restrict the use of standard Bently Nevada 3300 and 3300 XL 5 and 8 mm sensor systems. It is also ideal for small target applications, such as measuring the radial vibration of axes less than 51 mm (2 in) or the axial position of planar targets less than 15 mm (0.6 in). It is mainly used in the following applications of fluid film bearing machines where small shafts or reduced side views are present:
Radial vibration and radial position measurement
Axial (thrust) position measurement
Tachometer and zero speed measurement
Phase reference (Keyphasor) signal.

330930-065-00-00 3300 XL NSv接近传感器 抗干扰能力强