350015 127610-99 交流电源模块和直流电源模块

350015 127610-99 交流电源模块和直流电源模块

3500/15交流电源模块和直流电源模块为半高模块必须安装在机架左侧的指定槽位上。的3500机架可以包含一个或两个电源的任何组合交流和直流。任何一种电源都可以为整个机架供电。
当机架内安装两个电源时，下方的电源插槽充当主电源，而另一个在上插槽充当备份供应。如果安装，第二个电源是备份主要的一个。
拔插任何一个电源模块都不停机机架只要安装第二电源即可正常运行。3500/15交流和直流电源接受广泛的输入电压，并将其转换为可接受的电压，以供他人使用3500模块。
描述该选项使用通用AC电源和通用交流电源输入模块(PIM)。
输入电压110至220伏标称85至264伏rms120至373 Vac pk通用交流电源和电源输入模块没有兼容传统的高电压交流或低电压交流单元。
1. 3500/15交流和直流电源OK LED
2. 旧的低压直流电源输入模块
3.传统高压直流电源输入模块
4. 传统高压交流电源输入模块
5. 旧低压交流电源输入模块
6. 通用交流电压电源输入模块
7. 高压直流电源输入模块
8. 低压直流电源输入模块

350015 127610-99 交流电源模块和直流电源模块

3500/15 AC power module and DC power module are half-height modules. The modules must be installed in the specified slot on the left of the rack. The 3500 rack can contain any combination of one or two power supplies AC and DC. Any kind of power supply can power the entire rack.
When two power supplies are installed in the rack, the lower power socket acts as the primary power supply, while the other one in the upper slot acts as a backup supply. If installed, the second power supply is the backup primary one.
Remove and insert any power module without stopping the rack as long as the second power supply can be installed to run normally. 3500/15 AC and DC power supplies accept a wide range of input voltages and convert them to acceptable voltages for use by others.
Description This option uses both a universal AC power supply and a Universal AC Power Input Module (PIM).
Input voltages 110 to 220 volts Nominal 85 to 264 volts rms120 to 373 Vac pk Universal AC power supplies and power input modules are not compatible with traditional high voltage AC or low voltage AC units.
1. 3500/15 AC and DC power OK LED
2. The old low-voltage DC power input module
3. Traditional HVDC power input module
4. Traditional high-voltage AC power input module
5. The old low-voltage AC power input module
6. General AC voltage power input module
7. HVDC power input module
8. Low-voltage DC power input module

350015 127610-99 交流电源模块和直流电源模块