350040M 140734-01 款用于工业自动化和过程控制的传感器模块

350040M 140734-01 款用于工业自动化和过程控制的传感器模块

参数如下：
电源电压：10-30VDC。
工作电流：平均电流为25mA，zui大电流为50mA。
工作温度：-25℃至+70℃。
相对湿度：0%至95%相对湿度，无凝露。
尺寸：107.9mm x 76.2mm x 38.1mm。
该传感器模块主要用于液位、流量、压力和温度等工业过程参数的监测和测量。其输出信号为4-20mA，可与PLC、DCS或其他控制系统连接，实现远程监控和数据采集。该传感器模块具有低功耗、高可靠性和长寿命等特点，能够适应各种恶劣的工业环境。
BENTLY 3500/40M 140734-01的特点如下：
高精度测量：可以精 确测量机器的振动和位移。
实时监控：能够提供实时的振动数据，以便操作人员能够随时了解设备的状况。
数据记录：通常可以记录历史振动数据，以便进行趋势分析和故障诊断。
警报功能：可以设置振动阈值，一旦振动超过设定的阈值，系统会触发警报或报警。
通信接口：可能具备通信接口，允许与其他设备或系统进行数据交换。
多参数监测：除了振动，还可能监测其他参数，如温度、压力等。
远程访问：一些监视器可能允许远程访问，以便操作人员可以从远处监控设备状态。
易于安装：通常设计为易于安装和配置，以便快速投入使用。
适应多种环境：适用于不同类型的工业环境，包括恶劣的条件。

350040M 140734-01 款用于工业自动化和过程控制的传感器模块

The parameters are as follows:
Power supply voltage: 10-30VDC.
Working current: Average current is 25mA, maximum current is 50mA.
Operating temperature: -25℃ to +70℃.
Relative humidity: 0% to 95% relative humidity, no condensation.
Dimensions: 107.9mm x 76.2mm x 38.1mm.
The sensor module is mainly used for the monitoring and measurement of industrial process parameters such as liquid level, flow rate, pressure and temperature. Its output signal is 4-20mA, which can be connected with PLC, DCS or other control systems to achieve remote monitoring and data acquisition. The sensor module has the characteristics of low power consumption, high reliability and long life, and can adapt to various harsh industrial environments.
The BENTLY 3500/40M 140734-01 features the following:
High precision measurement: The vibration and displacement of the machine can be accurately measured.
Real-time monitoring: Real-time vibration data can be provided so that the operator can know the condition of the equipment at any time.
Data logging: Historical vibration data can often be recorded for trend analysis and fault diagnosis.
Alarm function: The vibration threshold can be set, and once the vibration exceeds the set threshold, the system will trigger an alarm or alarm.
Communication interface: May have a communication interface that allows data exchange with other devices or systems.
Multi-parameter monitoring: In addition to vibration, other parameters may also be monitored, such as temperature, pressure, etc.
Remote access: Some monitors may allow remote access so that the operator can monitor device status from a distance.
Easy to install: Usually designed to be easy to install and configure for quick use.
Suitable for a variety of environments: suitable for different types of industrial environments, including harsh conditions.

350040M 140734-01 款用于工业自动化和过程控制的传感器模块