3500/70M 复式脉冲速度监测仪

3500/70M 复式脉冲速度监测仪

3500/70M往复式脉冲速度监测仪是一个4通道仪器用作往复式压缩机一部分的装置监控压缩机曲轴箱和十字头振动。监视器接受来自地震的输入传感器，调节信号以产生振动测量，并将调节后的信号与用户可编程报警。您可以使用3500框架对每个通道进行编程组态软件执行以下功能:
l脉冲加速度
l加速2往复速度

l低频往复速度监控通道成对编程，可以一次zui多执行两项上述功能。例如，通道1和2可以执行一种功能而通道3和4执行另一个或相同的操作功能。3500/70米往复脉冲速度的主要目的监视器将提供以下内容:l通过以下方式为往复式压缩机提供机械保护连续比较监控参数根据配置的报警设定值驱动报警

l基本往复式压缩机操作和维护信息人事部门根据配置，每个通道通常调节其输入信号以产生各种参数称为静态值。您可以为以下项目配置报警设定点以下任意两项的每个活动静态值和危险设定值活动静态值。

3500/70M 复式脉冲速度监测仪

The 3500/70M Reciprocating Pulse Speed Monitor is a 4-channel instrument used as part of a reciprocating compressor to monitor compressor crankcase and crosshead vibration. The monitor accepts the input sensor from the earthquake, adjusts the signal to produce vibration measurements, and combines the adjusted signal with a user programmable alarm. You can use the 3500 framework to program each channel configuration software to perform the following functions:
l Pulse acceleration
l Accelerate 2 reciprocating speed

Low frequency reciprocating speed monitoring channels are programmed in pairs and can perform up to two of the above functions at a time. For example, channels 1 and 2 May perform one function while channels 3 and 4 perform another or the same operational function. The main purpose of the 3500/70 m reciprocating pulse speed monitor will provide the following :l Provide mechanical protection for the reciprocating compressor by the following way Continuous comparison monitoring parameters Drive the alarm according to the configured alarm set value

l Basic reciprocating compressor operation and maintenance information Personnel Department Depending on the configuration, each channel usually adjusts its input signal to produce various parameters called static values. You can configure each active static and hazard set for any two items below the alarm set point Activity static.