3500/15 133300-01 电源输入模块 提供稳定可靠的直流电源

3500/15 133300-01 电源输入模块 提供稳定可靠的直流电源

330500-01-00速度传感器是由Bently Nevada制造的压电速度传感器。 它设计用于测量旋转机械的绝 对振动速度，例如轴、轴承和外壳。这些信息对于监控旋转机械的运行状况和性能以及在潜在问题造成严重损坏或停机之前检测潜在问题至关重要。

330500-01-00 速度传感器的主要特点：

测量范围： 0.1 至 1270 mm/s （0.4 至 50 英寸/秒）

频率响应： 4.5 Hz 至 5 kHz

敏感性： 3.94 mV/mm/s （100 mV/in/s） ± 5%

工作温度：-67 至 250°C（-55 至 121°F）

外壳材料：316L不锈钢

防护等级：IP67

330500-01-00速度传感器的应用：

振动监测：监测旋转机械的振动水平，以检测潜在的问题，如不平衡，失调和轴承磨损

预测性维护：实施预测性维护计划，根据实际机器状况而不是固定的时间间隔安排维护

根本原因分析：确定机械问题的根本原因，防止再次发生

性能优化：通过减少振动和提高效率来优化机械性能

总体而言，330500-01-00 速度传感器是旋转机械状态监测和预测性维护的重要工具，有助于防止计划外停机、延长机器寿命并提高工厂的整体可靠性。

以下是有关传感器的一些其他详细信息：

安装螺纹：1/2-20 联合国基金会

电缆长度：6米（19.7英尺）

连接器类型：军用-C-5015

认证：CSA/美国/C

3500/15 133300-01 电源输入模块 提供稳定可靠的直流电源

The 330500-01-00 speed sensor is a piezoelectric speed sensor manufactured by Bently Nevada. It is designed to measure the absolute vibration speed of rotating machinery, such as shafts, bearings and housings. This information is critical to monitoring the health and performance of rotating machinery and detecting potential problems before they cause serious damage or downtime.

330500-01-00 Main features of the speed sensor:

Measuring range: 0.1 to 1270 mm/s (0.4 to 50 inches /s)

Frequency response: 4.5 Hz to 5 kHz

Sensitivity: 3.94 mV/mm/s (100 mV/in/s) ± 5%

Operating temperature: -67 to 250°C (-55 to 121°F)

Case material: 316L stainless steel

Protection level: IP67

330500-01-00 Application of speed sensor:

Vibration monitoring: The vibration level of rotating machinery is monitored to detect potential problems such as unbalance, misalignment and bearing wear

Predictive Maintenance: Implement a predictive maintenance plan that schedules maintenance based on actual machine conditions rather than fixed intervals

Root cause analysis: Determine the root cause of mechanical problems and prevent recurrence

Performance optimization: Optimize mechanical properties by reducing vibration and increasing efficiency

Overall, the 330500-01-00 speed sensor is an important tool for condition monitoring and predictive maintenance of rotating machinery, helping to prevent unplanned downtime, extend machine life and improve the overall reliability of the plant.

Here are some other details about the sensor:

Mounting thread: 1/2-20 United Nations Foundation

Cable Length: 6 m (19.7 ft)

Connector type: Military -C-5015

Certification: CSA/ USA /C

3500/15 133300-01 电源输入模块 提供稳定可靠的直流电源