330104-00-13-10-02-05 用于测量机械振动参数的传感器

330104-00-13-10-02-05  用于测量机械振动参数的传感器

330104-00-13-10-02-05 传感器是一款 8 mm 接近探头，属于 Bently Nevada 3300 XL 系列。它用于测量液膜轴承机上的振动和位置，以及Keyphasor参考和速度测量。该探头的线性范围为 5 mm，精度为 ±0.1%。它是一种多功能传感器，可用于各种应用，包括：
液膜轴承机的振动监测：330104-00-13-10-02-05 传感器可用于测量流膜轴承机械（如涡轮机、泵和压缩机）的振动水平。此信息可用于检测和诊断轴承磨损、未对中和其他问题。
液膜轴承机的位置监控：该传感器还可用于测量油膜轴承机上的轴和其他旋转部件的位置。此信息可用于确保机器正确对齐，并且组件在其指定限制内移动。
Keyphasor 参考和速度测量：该传感器可用于提供Keyphasor参考信号，该信号用于同步其他振动测量的定时。它还可用于测量旋转轴的速度。
技术规格：
探头类型：3300 XL 8 mm Proximitor 传感器
探头尖 端材料：聚苯硫醚（PPS）
探头外壳材料：AISI 303 或 304 不锈钢 （SST）
线性范围：5毫米（0.197英寸）
精度：满量程的±0.1%
输出电压范围：0 至 10 VDC
工作温度：-40°C 至 85°C（-40°F 至 185°F）
储存温度：-40°C 至 100°C（-40°F 至 212°F）
湿度：5% 至 95% RH（非冷凝）
振动：0.05 g rms，57 至 500 Hz
冲击：5 g，22 ms 半正弦波
应用：
330104-00-13-10-02-05 传感器是一种多功能工具，可用于各种应用，以测量振动、位置和速度。它通常用于以下行业：
发电：该传感器用于监测发电厂中涡轮机、发电机和其他旋转机械的状况。
石油和天然气：该传感器用于监测石油和天然气行业中泵、压缩机和其他旋转机械的状况。
石油化：该传感器用于监测石化工业中泵、压缩机和其他旋转机械的状况。
纸浆和造纸：该传感器用于监测纸浆和造纸工业中造纸机、干燥机和其他旋转机械的状况。
制造业：该传感器用于监测各种制造业中泵、压缩机和其他旋转机械的状况。
总体而言，330104-00-13-10-02-05传感器是旋转机械状态监测的重要工具。

330104-00-13-10-02-05  用于测量机械振动参数的传感器

The 330104-00-13-10-02-05 sensor is an 8 mm proximity probe from the Bently Nevada 3300 XL family. It is used to measure vibration and position on liquid film bearing machines, as well as Keyphasor reference and speed measurement. The probe has a linear range of 5 mm and an accuracy of ±0.1%. It is a versatile sensor that can be used in a variety of applications, including:
Vibration monitoring of liquid film bearing machines: 330104-00-13-10-02-05 sensors can be used to measure vibration levels of flow film bearing machines such as turbines, pumps and compressors. This information can be used to detect and diagnose bearing wear, misalignment and other problems.
Position monitoring of the liquid film bearing machine: The sensor can also be used to measure the position of the shaft and other rotating parts of the oil film bearing machine. This information can be used to ensure that the machine is properly aligned and that the component moves within its specified limits.
Keyphasor Reference and Speed measurement: This sensor can be used to provide a Keyphasor reference signal that is used to synchronize the timing of other vibration measurements. It can also be used to measure the speed of the axis of rotation.
Technical specifications:
Probe type: 3300 XL 8 mm Proximitor sensor
Probe tip material: polyphenylene sulfide (PPS)
Probe housing material: AISI 303 or 304 stainless steel (SST)
Linear range: 5 mm (0.197 in)
Accuracy: ±0.1% of full scale
Output voltage range: 0 to 10 VDC
Operating temperature: -40°C to 85°C (-40°F to 185°F)
Storage temperature: -40°C to 100°C (-40°F to 212°F)
Humidity: 5% to 95% RH (non-condensing)
Vibration: 0.05g rms, 57 to 500 Hz
Shock: 5 g, 22 ms half sine wave
Applications:
The 330104-00-13-10-02-05 sensor is a versatile tool that can be used in a variety of applications to measure vibration, position and speed. It is commonly used in the following industries:
Power generation: This sensor is used to monitor the condition of turbines, generators and other rotating machinery in power plants.
Oil and Gas: This sensor is used to monitor the condition of pumps, compressors and other rotating machinery in the oil and gas industry.
Petrification: This sensor is used to monitor the condition of pumps, compressors and other rotating machinery in the petrochemical industry.
Pulp and paper: This sensor is used to monitor the condition of paper machines, dryers and other rotating machinery in the pulp and paper industry.
Manufacturing: This sensor is used to monitor the condition of pumps, compressors and other rotating machinery in a variety of manufacturing industries.
Overall, the 330104-00-13-10-02-05 sensor is an important tool for condition monitoring of rotating machinery.

330104-00-13-10-02-05  用于测量机械振动参数的传感器