AI893 3BSC690141R1 模拟量输入模块

AI893 3BSC690141R1 模拟量输入模块

AI893 3BSC690141R1是ABB制造的模拟量输入模块，用于Advant Controller 400系列的S800 I/O系统。它设计用于接收和处理来自各种工业传感器和传感器的模拟信号，为过程控制、监控和报警应用提供有价值的数据。
主要特点：
8 个模拟输入通道：AI893 模块提供 8 个独立的模拟输入通道，每个通道都能够接受 15 位分辨率的 RTD（电阻温度检测器）或 TC（热电偶）信号，以实现精 确测量。
高精度：该模块提供高精度，确保以zui小的误差精 确测量模拟信号。
宽输入范围：该模块支持 RTD 和 TC 传感器的宽输入范围，适用于各种温度测量应用。
本质安全：该模块在每个通道上都具有本质安全保护组件，用于连接到危险区域的工艺设备，而无需额外的外部设备。
配置灵活：该模块可配置为 2 线或 3 线 RTD 传感器或 TC 传感器。
诊断：该模块提供用于故障、运行和警告指示的前面板 LED，并支持用于监控信道运行状况和信号完整性的诊断功能。
技术规格：
输入类型：RTD（电阻温度检测器）或TC（热电偶）
输入范围：
RTD：-200°C 至 800°C（-328°F 至 1472°F）
TC：-200°C 至 1800°C（-328°F 至 3272°F）
精度：满量程的±0.1%
分辨率：15位
更新速率：高达 250 ms
本质安全：ATEX II 1G Ex ia IIB T4
工作温度：-25°C 至 70°C（-13°F 至 158°F）
储存温度：-40°C 至 85°C（-40°F 至 185°F）
湿度：5% 至 95% RH（非冷凝）
振动：0.5 g rms，57 至 500 Hz

AI893 3BSC690141R1 模拟量输入模块

The AI893 3BSC690141R1 is an analog input module manufactured by ABB for the S800 I/O system in the Advant Controller 400 series. It is designed to receive and process analog signals from a variety of industrial sensors and sensors, providing valuable data for process control, monitoring and alarm applications.
Main features:
Eight analog input channels: The AI893 module provides eight independent analog input channels, each capable of accepting 15-bit resolution RTD (resistance temperature detector) or TC (thermocouple) signals for accurate measurements.
High accuracy: This module provides high precision, ensuring accurate measurement of analog signals with minimal error.
Wide input range: The module supports a wide input range of RTD and TC sensors for a variety of temperature measurement applications.
Intrinsically safe: The module has intrinsically safe protection components on each channel for connecting process equipment to hazardous areas without the need for additional external equipment.
Flexible configuration: The module can be configured as a 2-wire or 3-wire RTD sensor or TC sensor.
Diagnostics: This module provides front panel leds for fault, operational, and warning indications, and supports diagnostics for monitoring channel health and signal integrity.
Technical specifications:
Input type: RTD (Resistance temperature detector) or TC (Thermocouple)
Input range:
RTD: -200°C to 800°C (-328°F to 1472°F)
TC: -200°C to 1800°C (-328°F to 3272°F)
Accuracy: ±0.1% of full scale
Resolution: 15 bits
Update rate: up to 250 ms
Intrinsically safe: ATEX II 1G Ex ia IIB T4
Operating temperature: -25°C to 70°C (-13°F to 158°F)
Storage temperature: -40°C to 85°C (-40°F to 185°F)
Humidity: 5% to 95% RH (non-condensing)
Vibration: 0.5 g rms, 57 to 500 Hz

AI893 3BSC690141R1 模拟量输入模块