AI895 3BSC690086R1 可编程逻辑控制器
它设计用于接收和处理来自各种工业传感器和传感器的模拟信号,为过程控制、监控和报警应用提供有价值的数据。
主要特点:
8 个模拟输入通道:AI895 模块提供 8 个独立的模拟输入通道,每个通道能够接受 4-20 mA 信号,分辨率为 12 位,可进行精 确测量。
高精度:该模块提供高精度,确保以zui小的误差精 确测量模拟信号。
宽输入范围:该模块支持 -20 mA 至 +20 mA 的宽输入范围,可适应各种模拟信号类型。
HART通讯:该模块支持HART(高速公路可寻址远程传感器)通信协议,可实现智能现场设备管理和诊断。
隔离:该模块在通道和系统接地之间具有电气隔离功能,可防止噪声和接地环路。
快速更新速率:该模块提供每通道高达 250 ms 的快速更新速率,确保及时响应过程变化。
技术规格:
输入类型:模拟电流 (4-20 mA)
输入范围:-20 mA 至 +20 mA
精度:满量程的±0.1%
分辨率:12 位
更新速率:每通道高达 250 ms
HART通讯:符合 HART 6.0 标准
工作温度:-25°C 至 70°C(-13°F 至 158°F)
储存温度:-40°C 至 85°C(-40°F 至 185°F)
湿度:5% 至 95% RH(非冷凝)
振动:0.5 g rms,57 至 500 Hz
冲击:5 g,22 ms 半正弦波

AI895 3BSC690086R1 可编程逻辑控制器
It is designed to receive and process analog signals from a variety of industrial sensors and sensors, providing valuable data for process control, monitoring and alarm applications.
Main features:
8 analog input channels: The AI895 module provides 8 independent analog input channels, each capable of receiving 4-20 mA signals with a resolution of 12 bits for accurate measurements.
High accuracy: This module provides high precision, ensuring accurate measurement of analog signals with minimal error.
Wide input range: The module supports a wide input range from -20 mA to +20 mA to accommodate various analog signal types.
HART Communication: This module supports the HART (Highway Addressable Remote Sensor) communication protocol for intelligent field device management and diagnosis.
Isolation: The module has electrical isolation between the channel and system grounding to prevent noise and grounding loops.
Fast update rate: The module provides a fast update rate of up to 250 ms per channel, ensuring timely response to process changes.
Technical specifications:
Input Type: Analog current (4-20 mA)
Input range: -20 mA to +20 mA
Accuracy: ±0.1% of full scale
Resolution: 12 bits
Update rate: up to 250 ms per channel
HART Communication: HART 6.0 compliant
Operating temperature: -25°C to 70°C (-13°F to 158°F)
Storage temperature: -40°C to 85°C (-40°F to 185°F)
Humidity: 5% to 95% RH (non-condensing)
Vibration: 0.5 g rms, 57 to 500 Hz
Shock: 5 g, 22 ms half sine wave
AI895 3BSC690086R1 可编程逻辑控制器
| ABB CP405 1SAP500405R0001 Control Panel |
| ABB PFEA113-65 3BSE028144R0065 Tension E |
| ABB UFC760BE41 3BHE004573R0041 interface |
| ABB SYNCHROTACT5 3BHB006713R0217 SYN5201 |
| ABB PM866K02 3BSE050199R1 Redundant Proc |
| ABB PFVA401 Millmate Controller 400 tens |
| ABB 5SHY 3545L0016 MODULE IGCT 4500V 91M |
| ABB REM620A Motor protection and control |





QQ在线客服