IC694ALG442-CC 模拟组合电流/电压输入/输出模块

IC694ALG442-CC  模拟组合电流/电压输入/输出模块

GE Fanuc IC694ALG442-CC是一款用于Rx3i PacSystems的模拟组合电流/电压输入/输出模块。它提供四个不同的输入通道和两个单端输出通道。每个通道都可以使用 Machine Edition 软件在以下任何范围内进行配置：
（0 至 +10） 单极：这是系统的默认设置，除非更改，否则在安装时将自动设置。 
（-10 至 +10 伏）双极性：该范围用于需要正电压和负电压的应用。 
0 至 20 mA：该范围用于基于电流的输入信号。 
4 至 20 mA：该范围也用于基于电流的输入信号，但比 0 至 20 mA 范围更常用。 
输出通道可以配置为各种不同的输出类型，包括：
0 至 10 伏：该范围用于基于电压的输出信号。 
4 至 20 mA：该范围用于基于电流的输出信号。 
保持zui后状态：此选项允许输出保持其zui后一个值，即使输入信号不再存在。 
IC694ALG442-CC 是一款多功能模块，可用于各种应用，包括：
过程控制：该模块可用于监测和控制过程变量，例如温度、压力和流量。 
机器控制：该模块可用于控制机器和机器人的运动。 
测试与测量：该模块可用于测量和记录电信号。 
主要特点：
四个不同的输入通道 
两个单端输出通道 
每个通道可配置为单极性、双极性、0 至 20 mA 或 4 至 20 mA 输入 
输出通道可配置为 0 至 10 V、4 至 20 mA 或保持zui后状态输出 
20 至 30 VDC 电源电压 
DIN导轨安装 
应用：
过程控制 
机器控制 
测试与测量 
好处：
多功能性：可用于各种应用 
易用性：可使用 Machine Edition 软件进行配置 
可靠性：专为恶劣的工业环境而设计

IC694ALG442-CC  模拟组合电流/电压输入/输出模块

The GE Fanuc IC694ALG442-CC is an analog combined current/voltage input/output module for Rx3i PacSystems. It provides four different input channels and two single-ended output channels. Each channel can be configured using Machine Edition software in any of the following ranges:
(0 to +10) Unipolar: This is the default setting for the system and will be set automatically at installation unless changed.
(-10 to +10 volts) Bipolar: This range is used for applications that require both positive and negative voltages.
0 to 20 mA: This range is used for current-based input signals.
4 to 20 mA: This range is also used for current-based input signals, but is more commonly used than the 0 to 20 mA range.
Output channels can be configured for a variety of different output types, including:
0 to 10 volts: This range is used for voltage-based output signals.
4 to 20 mA: This range is used for current-based output signals.
Hold Last state: This option allows the output to hold its last value even if the input signal is no longer present.
The IC694ALG442-CC is a versatile module that can be used in a variety of applications, including:
Process control: This module can be used to monitor and control process variables such as temperature, pressure and flow.
Machine control: This module can be used to control the movement of machines and robots.
Test and measurement: This module can be used to measure and record electrical signals.
Main features:
Four different input channels
Two single-ended output channels
Each channel can be configured with unipolar, bipolar, 0 to 20 mA, or 4 to 20 mA inputs
The output channel can be configured for 0 to 10 V, 4 to 20 mA, or maintain the final state output
20 to 30 VDC supply voltage
DIN rail mounting
Applications:
Process control
Machine control
Test and measurement
Benefits:
Versatility: Can be used for a variety of applications
Ease of use: Configurable using Machine Edition software
Reliability: Designed for harsh industrial environments

IC694ALG442-CC  模拟组合电流/电压输入/输出模块