RSER200-4 是一种数字接口模块 可实现4路RS485总线的高速数据通

RSER200-4 是一种数字接口模块 可实现4路RS485总线的高速数据通

产品介绍

类型名称：RSER200-4 选用运动控制专用DSP、大规模可编程门阵列智能化功率模块(IPM)，集成度高、体积小、维护完善、可靠性好，选用先进的空间矢量控制算法，功能已达到国外同类产品的水平，具有如下特征：

1) 宽速比、恒转矩

调速比为1：5000，从低速到高速都具有稳定的转矩特性。

交流伺服电机为恒力矩输出，即在其额外转速(一般为2000RPM或3000RPM)以内，都能输出额外转矩，在额外转速以上为恒功率输出。

2) 高速度、高精度

转速可达3000rpm。

交流伺服电机带有标准2500线编码器，驱动器内部选用了四倍频技术，其脉冲当量为360°/10000=0.036°。

注：不同型号伺服电机转速不同。

3) 过载才能强

交流伺服电机具有较强的过载才能。其转矩为额外转矩的三倍，可用于战胜惯性负载在发动瞬间的惯性力矩。

4) 控制简略、操作活络

只需恰当修正驱动器的参数，就可以改变交流伺服系统的作业方法、运行特性等，以习惯不同的要求。

虽然伺服电机具有较强的过载才能，请不要使伺服电机超负荷作业

RSER200-4 是一种数字接口模块 可实现4路RS485总线的高速数据通

Product introduction

Type name: RSER200-4 selected motion control special DSP, large-scale programmable gate array intelligent power module (IPM), high integration, small size, perfect maintenance, good reliability, the use of advanced space vector control algorithm, the function has reached the level of similar foreign products, with the following characteristics:

1) Wide speed ratio, constant torque

Speed regulation ratio of 1:500, from low speed to high speed has stable torque characteristics.

Ac servo motor is a constant torque output, that is, within its additional speed (generally 2000RPM or 3000RPM), it can output additional torque, and above the additional speed is a constant power output.

2) High speed and high precision

Speed up to 3000rpm.

Ac servo motor with a standard 2500 line encoder, the driver internal selection of quadruple frequency technology, its pulse equivalent of 360°/10000=0.036°.

Note: Different types of servo motor speed is different.

3) overload can be strong

Ac servo motor has strong overload ability. Its torque is three times the additional torque and can be used to overcome the inertial torque of the inertial load at the moment of start-up.

4) Simple control, active operation

As long as the parameters of the drive are properly corrected, the operation method and operation characteristics of the AC servo system can be changed to get used to different requirements.

Although the servo motor has a strong overload ability, please do not overload the servo motor